Hitachi CP-X430WA, CP-S420WA user manual Installation, Cabling

01CP-S420/CP-X430 03.9.2 0:08 PM ページ 7

INSTALLATION (continued)

Cabling

Refer to the table below for connecting each terminal of the projector to a device.

Table 2. Cabling

Function	Terminal	Cable
RGB input	RGB IN 1
		RGB cable with D-sub 15-pin shrink jack
	RGB IN 2
		and inch thread screws
RGB output	RGB OUT
DVI input (CP-X430 only)	DVI	DVI cable with inch thread screws
	AUDIO IN 1
Audio input	(interlocked with RGB IN 1 or DVI)	Audio cable with stereo mini jack
(from the computer)	AUDIO IN 2
	(interlocked with RGB IN 2)
PS/2 mouse control		PS/2 mouse cable
ADB mouse control	CONTROL	ADB mouse cable
Serial mouse control		Serial mouse cable
RS-232C communication		RS-232C cable
USB mouse control	USB	USB cable
S-video input	S-VIDEO IN	S-video cable with mini DIN 4-pin jack
Video input	VIDEO IN	Video/Audio cable
	COMPONENT VIDEO Y
Component video input	COMPONENT VIDEO CB/PB	Component Video cable
	COMPONENT VIDEO CR/PR
Audio input	AUDIO IN L	Video/Audio cable
(from video equipment)	AUDIO IN R	or Audio cable with RCA jack
Audio output	AUDIO OUT	Audio cable with stereo mini jack

ENGLISH

CAUTION • Incorrect connecting could result in fire or electrical shock. Please read this manual and the separate “SAFETY INSTRUCTIONS”.

•Before connecting, turn off to all devices to be connected, except for the USB cable.

•The cables may have to be used with the core set to the projector side. Use the cables which are included with the projector or specified.

NOTE • Before connecting, read instruction manuals of the devices to be connected, and make sure that the projector is compatible with the device.

•Secure the screws on the connectors and tighten.

•For some RGB input modes, the optional Mac adapter is necessary.

•To select the DVI input, the comuter may need some settings. See the manuals of the computer for details.

•Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.

•Refer to the “TECHNICAL” section for the pin assignment of connectors and RS-232C communication data.

•When the DVI terminal is used, the RGB OUT terminal may not function.

ENGLISH-7