Hitachi CP-X430WA, CP-S420WA Technical, Dimension Diagram, Signal Connector Pin Assignment

Page 26

09CP-S420/CP-X430 03.9.9 2:13 PM ページ 1

TECHNICAL

Dimension Diagram

	/P C /P C
	360
266		256.5
	108.4
112.5 49.7	62.8	Unit : mm

Signal Connector Pin Assignment

1. D-sub 15-pin Shrink Connector (RGB IN 1/RGB IN 2/RGB OUT)

Pin No	Signal	Pin No	Signal		Pin No			Signal

1	Video input Red	9	-			RGB IN 1: SCL(DDC)

2	Video input Green	10	Ground	15		RGB IN 2:		-

3	Video input Blue	11	-			RGB OUT:			-

4	-		RGB IN 1: SDA(DDC)		10		9	8	7	6

5	Ground	12	RGB IN 2: -

6	Ground Red		RGB OUT: -
					1514		13	12	11
7	Ground Green	13	H. sync./ Composite sync.		1514		13	12	11
8	Ground Blue	14	Vertical sync

2. Digital Receptacle Connector (DVI) (*CP-X430 only)

Pin No	Signal	Pin No	Signal	Pin No					Signal

1	T.M.D.S. Data 2 -	11	T.M.D.S. Data 1 / 3 Shield	21						-

2	T.M.D.S. Data 2 +	12	-	22		T.M.D.S. Clock Shield

3	T.M.D.S. Data 2 / 4 Shield	13	-	23		T.M.D.S. Clock +

4	-	14	+5V Power	24		T.M.D.S. Clock -

5	-	15	Ground (+5V, Analog H/V Sync.)

6	DDC Clock	16	Hot-Plug Sense

7	DDC Data	17	T.M.D.S. Data 0 -	1	2	3	4	5	6	7	8
8	Analog V. Sync.	18	T.M.D.S. Data 0 +	9	10	11	12	13	14	15	16
8	Analog V. Sync.	18	T.M.D.S. Data 0 +	17	18	19	20	21	22	23	24
				17	18	19	20	21	22	23	24
9	T.M.D.S. Data 1 -	19	T.M.D.S. Data 0 / 5 Shield

10	T.M.D.S. Data 1 +	20	-

3. Mini Din 4-pin Connector (S-VIDEO)

Pin No

Signal

Color:0.286Vp-p (NTSC, burst signal),75Ω terminator

1

0.300Vp-p (PAL/SECAM, burst signal),75Ω terminator

2Brightness:1.0Vp-p, 75Ω terminator

3Ground

4Ground

TECHNICAL

TECHNICAL - 1

Image 26

Contents CP-S420/CP-X430 CP-S420WA/CP-X430WA/CP-X430WContents Before USE FeaturesContents of Package Component Video Before USEPart Names Transmitter Refer to P.9 OperationsLoading the Batteries Angle Adjustment InstallationInstallation of the Projector and Screen Installation ReferenceCabling InstallationCabling Plug & Play Power ConnectionExample of System Setup Operations Power onPower OFF StandbyBasic Operation Description OperationsBasic Operation Menu Display Start/Stop Press the Menu button Select Mode of P.IN P. Display Press the PinP buttonNormal menu Single menu Setup Menu Setup MenuInput Menu Automatic Adjustment at RGB Input Select the Execute withAutomatic Adjustment at Video Input Select the Execute with Input MenuStart UP Image MenuImage Menu Description MirrorSelect Menu Background Color Select with the / button Options MenuOptions Menu Reduce Increase No Signal MenuNo Signal Menu Description Lamp Life MaintenanceLamp Replacing the Lamp MaintenanceResetting the Lamp Timer Other Maintenance Air FilterOSD Message TroubleshootingMessage Contents OSD MessageIndicators Message TroubleshootingIndicators Message IndicatorSymptom Possible cause Remedy SymptomSymptom Specifications SpecificationsWarranty and AFTER-SERVICE Technical Dimension DiagramSignal Connector Pin Assignment Example of computer signal TechnicalInitial set signals USB Mouse Connection to the Mouse ControlPS/2, ADB or Serial Mouse PS/2 MouseADB Mouse Serial MouseRS-232C communication Communications settingCommand data ProtocolUsing the projector default settings Reset Command Requesting projector status Get commandChanging the projector settings Set command Increasing the projector setting value Increment commandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL Be EF CB D0 For the Customers in Canada Pour les utilisateurs au Canada Regulatory NoticesFCC Statement Warning Hitachi Europe GmbH, Digital Media Group Hitachi Europe, Digital Media GroupHitachi Europe S.r.1, Digital Media Group Hitachi Europe AB