Hitachi CP-S860E Adjustments and functions, Returning to the initial settings, Press the Menu

Page 17

Adjustments and functions

1, 2, 3	VIDEO	RGB
	LASER
	STANDBY/ON	POSITION

RESET

FREEZE

MAGNIFY VOLUME

2, 3

OFF

P in PMUTE

1	BLANK AUTO	TIMER
	FOCUS	ZOOM

1, 3

1	Press the MENU (	) buttons of the projector or the
	MENU button of the remote control.

• The Menu screen will appear. (refer to page 18-21 for details.)

2	Press the MENU (	) buttons of the projector or the DISK PAD
	button of the remote control to select the menu item to be adjusted.

• The selected menu item will be displayed in green.

3	Press the MENU (	) buttons of the projector or the
	DISK PAD button of the remote control to select the menu

item to be adjusted.

•The selected menu item will be displayed in green. The menu will disappear after 5 - 10 sec.

Returning to the initial settings

•Select the adjustment item to be returned to the initial settings.

•Press the RESET button.

Image 17

Contents Outline FeaturesContentsPage Page Before Use Do not install on an unstable surface If a problem should occurDo not look through the lens when the lamp is on Use only the indicated power supplyDo not allow the laser beam to enter the eyes Handle the power cord with careDo not position the power Battery usage Care and maintenanceClean the projector interior once every two years Avoid installation in humid or dusty locationsAvoid excessively hot locations Sound volumeLens care Cabinet careNames and functions of each part Checking the package ContentsNames and functions of each part Disk PAD Remote control transmitter2Loading the batteries 1Remove the battery cover3Close the battery cover Typical LCD Projector and Screen Installation InstallationUsing the adjusters Top view Side viewTo project Basic operationsTurn off the main power switch of the projector OFF Turning off the powerPlug & Play Press the STANDBY/ON button for approximately 1 secPress the Freeze button Cancelling the Freeze functionFreeze function Changing the magnification ratio Magnify functionMoving the display area Returning to normal displayPress the Menu Adjustments and functionsReturning to the initial settings Using the Setup Menu RGB InputBlank KeystoneLanguage TimerConnection to the RGB signal terminal Connection to the video signal terminalsInput signals Signal input jacksExample of computer signal Connection to the RGB signal terminalInitial set signals Connection to the RGB signal terminalConnecting the USB Mouse functions Connection to the control signal terminalControl signal jack Connection to the control signal terminalRS232C communication System Video Command data chartRequesting projector status Pull out the power cord Remove the front air filter Example of system setupCleaning the Air filter Installing the air filter Cleaning the air filter with a vacuum cleanerLamp Message tableIndicators When you think something wrongDimensional Diagram SpecificationsRepairs after the warranty period has elapsed About the warranty and after-serviceAbout the warranty

Adjustments and functions

Press the MENU (

) buttons of the projector or the DISK PAD

Returning to the initial settings