Multifunctional settings
Multifunctional settings
Using the menu function
This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, SCREEN, OPTION, and EASY MENU. EASY MENU consists of functions often used, and the RWKHUPHQXVDUHFODVVL¿HGLQWRHDFKSXUSRVH(DFKRIWKHVHPHQXVLVRSHUDWHGXVLQJ the same methods. The basic operations of these menus are as follows.
MENU button
ENTER button
Cursor buttons RESET button
|
| VIDEO | RGB | SEARCH |
|
|
| ASPECT |
| AUTO | BLANK |
POSITION | MENU | MAGNIFY | HOME | PAGE UP | VOLUME |
|
| ON | |||
|
| OFF | END | PAGE DOWN | MUTE |
| ENTER | FREEZE | MY BUTTON1 2 KEYSTONE | ||
|
|
|
|
| |
|
| POSITION |
|
| MENU |
ESC | RESET |
|
|
|
|
|
|
| ENTER |
| |
|
| ESC |
|
| RESET |
1. Press the MENU button on the remote control or one of the cursor buttons on the projector.
The Advanced MENU or EASY MENU will appear.
In the EASY MENU
2. If you want to change it to the Advanced MENU, select the "Go to Advanced Menu"
3. 8VHWKHFXUVRUEXWWRQVŸźWRVHOHFWDQLWHPWRRSHUDWH
4. 8VHWKHFXUVRUEXWWRQVŻŹWRRSHUDWHWKHLWHP
In the Advanced MENU
2. 8VHWKHFXUVRUEXWWRQVŸźWRVHOHFWDPHQX
If you want to change it to the EASY MENU, select the
EASY MENU. 7KHQSUHVVWKHFXUVRUEXWWRQŹRQWKHSURMHFWRURUUHPRWH control, or the ENTER button on the remote control to select an item. The display of the selected menu will be active.
/'07=4)$? | 5'.'%6 | ||
|
| ||
2+%674' | $4+)*60'55 | ||
+/#)' | %1064#56 | ||
+0276 | )#//#&'(#7.6 | ||
5'672 | %1.146'/2/+&&.' | ||
5%4''0 | %1.14 | ||
126+10 | 6+06 | ||
'#5;/'07 5*#420'55 | |||
/;/'/14;5#8' | |||
'#5;/'07=4)$? |
| |
#52'%6 | ||
':'%76' | ||
014/#. | ||
2+%674'/1&' | ||
$4+)*60'55 | ||
%1064#56 | ||
%1.14 | ||
6+06 | ||
5*#420'55 | ||
014/#. | ||
9*+52'4 | ||
/+4414 | 014/#. | |
4'5'6 | J | |
(+.6'46+/' | ||
.#0)7#)' | '0).+5* | |
)QVQ#FXCPEGF/GPW | ||
3. 8VHWKHFXUVRUEXWWRQVŸźWRVHOHFWDQLWHPWRRSHUDWH
Then press the cursor button Ź on the projector or remote control, or the ENTER button on the remote control to progress. The operation menu of the selected item will appear.
4. 8VHWKHFXUVRUEXWWRQVŸźWRRSHUDWHWKHLWHP
ƔWhen you want to reset the operation, press the RESET button on the remote control during the operation. Note that items whose functions are performed simultaneously with operation (ex. LANGUAGE, H PHASE, VOLUME etc.) cannot be reset.
ƔIn the advanced menu, when you want to return to the previous display, press the cursor button Ż on the projector or remote control, or the ESC button on the remote control.
5. Press the MENU button on the remote control again to close the menu and complete this operation. Even if you don't do anything, the dialog will
automatically disappear after about 10 seconds.
Ɣ6RPHIXQFWLRQVFDQQRWEHSHUIRUPHGZKHQDFHUWDLQLQSXWSRUWLVVHOHFWHGRU when a certain input signal is displayed.
24