Hitachi ED-X12 user manual RS-232C Communication, Connecting the cable, Communications setting

RS-232C Communication

RS-232C Communication

1	2	3	4	5
6	7	8		9

CONTROL port	RS-232C cable (Cross)
of the projector	- (1)	(1)	CD
	RD (2)	(2)	RD
	TD (3)	(3) TD
	- (4)	(4)	DTR
	GND (5)	(5) GND
	- (6)	(6)	DSR
	RTS (7)	(7)	RTS
	CTS (8)	(8)	DTS
	- (9)	(9)	RI

1 2 3 4 5

6 7 8 9

RS-232C port

of the computer

Connecting the cable

1. Turn off the projector and the computer.

Connect the CONTROL port of the projector with a RS-232C port of

2. the computer by a RS-232C cable (cross). Use the cable that fulfills the

VSHFL¿FDWLRQVKRZQLQWKHSUHYLRXVSDJH

Turn the computer on, and after the computer has started up turn the

3. projector on.

Communications setting

19200bps, 8N1

1. Protocol

Consist of header (7 bytes) + command data (6 bytes).

2. Header

BE + EF + 03 + 06 + 00 + CRC_low + CRC_high &5&BORZ/RZHUE\WHRI&5&ÀDJIRUFRPPDQGGDWD &5&BKLJK8SSHUE\WHRI&5&ÀDJIRUFRPPDQGGDWD

3.Command data

Command data chart

byte_0	byte_1 byte_2			byte_3	byte_4 byte_5
Action			Type		Setting code
low	high	low		high	low	high
Action (byte_0 - 1)
Action	&ODVVL¿FDWLRQ				Content
1	SET		Change setting to desired value.
2	GET		Read projector internal setup value.
4	INCREMENT		Increment setup value by 1.
5	DECREMENT		Decrement setup value by 1.
6	EXECUTE		Run a command.

6