Hitachi ED-X12 Using the PIN Lock Function, Turning the Password off, Registering the PIN Code

Page 46
/[5ETGGP
%1/2.'6'

'06'4 ':+6
PASSWORD BOX

OPTION Menu

OPTION Menu (continued)

Item

Description

SECURITY

2.2-4 Move the cursor to the right side of the CHECK 3$66:25'%2;DQGSUHVVWKHŹEXWWRQWR display the PASSWORD for about 20 seconds, please make note of the PASSWORD during this time. After the PASSWORD has displayed for about 20 seconds the screen will return to the MyScreen PASSWORD on/off menu.

Pressing the ENTER button on the remote control or INPUT button on the projector will close the PASSWORD box.

When a PASSWORD is set for MyScreen:

•The MyScreen registration function (and menu) will be unavailable.

•The START UP setting will be locked on MyScreen (and the menu will be unavailable).

Turning the MyScreen PASSWORD off will allow normal operation of both functions.

NOTE : Please do not forget your MyScreen PASSWORD.

2.3 Turning the PASSWORD off

2.3-1 Follow the procedure in 2.1-1 to display the MyScreen PASSWORD on/off menu.

2.3-2 Select TURN OFF to display the ENTER PASSWORD BOX (large). Enter the registered PASSWORD and the screen will return to the MyScreen on/off menu.

If an incorrect PASSWORD is input the menu will close. If necessary repeat the process from 2.3-1.

2.4 If you have forgotten your PASSWORD

2.4-1 Follow the procedure in 2.1-1 to display the MyScreen PASSWORD on/off menu.

2.4-2 Select TURN OFF to display the ENTER PASSWORD BOX (large). The 10 digit Inquiring Code will be displayed inside the BOX.

2.4-3 Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD will be sent after

\RXUXVHUUHJLVWUDWLRQLQIRUPDWLRQLVFRQ¿UPHG

/[5ETGGP

'06'42#55914&

+PSWKTKPI%QFG 



37+60':6

ENTER PASSWORD BOX

(large)

3. Using the PIN LOCK Function

PIN LOCK is a function which prevents the projector from being used unless a registered Code is input.

3.1 Registering the PIN Code

2+0.1%-

8VHWKHŸźEXWWRQVRQWKH6(&85,7<PHQX

674010

WRVHOHFW3,1/2&.DQGSUHVVWKHŹEXWWRQ

67401((

or the ENTER button to display the PIN LOCK

 

on/off menu.

PIN LOCK on/off

 

menu

8VHWKHŸźEXWWRQVRQWKH3,1/2&.RQRII menu to select TURN ON and the PIN BOX will be displayed.

46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Setting up ContentAbout this manual Content Projector features Remote controlAbout contents of package Fastening the lens cover Projector Part namesLamp and vents of the projector. Ì It could cause a burn Video port CB/PB CR/PRAudio OUT port Cursor buttons ŸźŻŹ STANDBY/ON button Remote controlControl buttons MagnifySetting up WKHDLU¿OWHUProjection distance Screen height ArrangementScreen 16 9 screen InchAdjusting the projectors elevator Elevator feet Elevator buttonHow to attach Using the Security BarSecurity Bar Anti-theft chain or wire sold separately Connecting your devices About Plug-and-Play capabilityConnecting to a monitor output Examples of connection with a computerCB/PB Examples of connection with a VCR/DVD playerScart Connecting power supply AC inlet Connector Power cordRemote control Putting batteriesUsing the remote control Changing the signal setting for the projectors remote sensorTurning off the power Power on/offTurning on the power STANDBY/ONOperating Adjusting the volumeSelecting an input signal Temporarily muting the soundSelecting an input signal Searching an input signalAdjusting the zoom and focus Selecting an aspect ratio€ For a video signal or s-video signal Using the automatic adjustment featureAdjusting the position € For a component video signalCorrecting the keystone distortions Using the magnify featureWill be restored when the projector exits the Magnify mode Screen to aid you in correcting the distortion. /#07#.Freezing the screen Temporarily blanking the screenUSB mouse and keyboard control Available function Remote control operationOperating the computer screen Move pointerEasy Menu Multifunctional settingsUsing the menu function Advanced MenuEasy Menu Easy Menu Picture Menu Selecting a mode of Custom and thenAdjustment by pressing the Enter button 8VLQJWKHEXWWRQVŸźVZLWFKHVWKH*$00$PRGHColor Temp Picture MenuSelecting the Custom and then pressing On the whole tones of the test patternSAVE4 ÙSAVE3 Ù SAVE2 Ù SAVE1 LOAD1 Ù LOAD2 Ù LOAD3 Ù LOAD4MY Memory Normal Ù 43 Ù 169 Ù Small PhaseImage Menu Over ScanFor a component video signal For a video signal or s-video signalAuto Adjust Image MenuProgressive Input MenuVideo NR Frame Lock Input MenuVideo Format RGBResolution Function again Setup MenuWhen the zoom adjustment is set to the Tele telephoto focus Downward, this function may not work correctlyNormal Ù Hinvert Ù Vinvert Ù+ Setup MenuVolume AudioMenu Position Screen MenuBlank Start UP Screen MenuMyScreen Lock Sync is OUT of Range No Input is DetectedMessage Auto Search Option MenuAuto on Lamp Time Option MenuAuto OFF MY ButtonEnable Ù Disable ServiceFactory Reset Ù Information Ù Remote Freq High Ù Normal1NORMAL Ù 2HIGH Remote FreqInformation Changing the Password Using Security FeaturesInputting the Password SecurityTurning on the MyScreen Password Using the MyScreen Password FunctionDescription If you have forgotten your Password Setting the PasswordRegistering the PIN Code Using the PIN Lock FunctionTurning the Password off 8VHWKHŸźEXWWRQVRQWKH6&85,7PHQXTurning Off the PIN Lock Function If you have forgotten your PIN CodeSetting the Transition Detector Password Using the Transition Detector FunctionTurning On the Transition Detector Function Menu Select Turn OFF to display the Enter Setting the Transition Detector offPassword BOX large. The 10 digit Inquiring Code will be displayed insideMaintenance LampType number = DT00757 Case of replacement by yourselfLamp To lock it in placeType number = NJ22222 Handle Filter cover$LU¿OWHU Option menuMark Inside of the projector Caring for the cabinet and remote controlOther care Caring for the lensInternal temperature is rising TroubleshootingThere is no input signal Related messagesRegarding the indicator lamps There is a possibility that the interior portion Regarding the indicator lampsCooling fan is not operating Has become heatedSignal cables are not correctly connected Electrical power cord is not pluggedPower switch is not set to the on position Signal source does not correctly workColor settings are not correctly adjusted Volume is adjusted to an extremely low levelAudio setting is not correct Color Space setting is not suitableWhisper function is working Not properly adjustedEither the focus and/or horizontal phase settings are Lamp is approaching the end of its product LifetimeWarranty and after-service 6SHFL¿FDWLRQ249 mm 306 mm 86 mm 100 mm Vesa Text Example of computer signalVesa Initial set signals Connection to the ports At RGB signalPin Component Video D Y, E CB/PB, F CR/PR CR/PR Component video CR/PR“9SSȍWHUPLQDWRURTS CTSCommunications setting Connecting the cableRS-232C Communication Using the projector default settings Reset Command Requesting projector status Get commandChanging the projector settings Set command Increasing the projector setting value Increment commandRS-232C Communication Be EF FB FA Color Temp Gain G Aspect Frame Lock Mute Blank Remote Freq Greece
Top Page Image Contents