Hitachi 8000 Elite manual Enww

Page 46

9.Gently slide the drive into the uppermost available bay until it snaps into place. When the drive is properly inserted, the drivelock will secure it. Repeat this step for each drive.

Figure 2-38Installing a Drive in the Desktop Configuration

CAUTION: The bottom 5.25-inch drive bay has a shorter depth than the upper two bays. The bottom bay supports a half-height drive or other device that is no more than 14.5 cm (5.7 inches) in depth. Do not try to force a larger drive, such as an optical drive, into the bottom bay. This could cause damage to the drive and the system board. The use of unnecessary force when installing any drive into the drive bay may result in damage to the drive.

10.Reconnect all power and data cables to the drives in the 5.25-inch drive bays.

11.Remove the bezel subpanel as described in Removing Bezel Blanks on page 14.

CAUTION: Hold the subpanel straight when you pull it away from the front bezel. Pulling the subpanel away at an angle could damage the pins that align it within the front bezel.

12.Reposition the bezel blanks within the subpanel in the proper orientation for the desktop configuration.

40 Chapter 2 Hardware Upgrades

ENWW

Image 46

Contents Hardware Reference Guide Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix D Electrostatic Discharge Product Features Standard Configuration FeaturesFront Panel Components 1Front Panel ComponentsMedia Card Reader Components 2Media Card Reader ComponentsRear Panel Components 3Rear Panel Components4Keyboard Components Using the Windows Logo KeyKeyboard 5Windows Logo Key FunctionsArrow Serial Number Location 6Serial Number and Product ID LocationHardware Upgrades Serviceability FeaturesUnlocking the Smart Cover Lock Smart Cover FailSafe Key1Removing the Smart Cover Lock Screws Removing the Computer Access Panel Replacing the Computer Access Panel 3Replacing the Computer Access Panel Hardware UpgradesRemoving the Front Bezel Removing Bezel Blanks Replacing the Front Bezel 6Replacing the Front BezelDIMMs Installing Additional MemoryDDR3-SDRAM DIMMs Populating Dimm Sockets 1DIMM Socket LocationsInstalling DIMMs Enww Removing or Installing an Expansion Card 2Expansion Slot Locations11Removing an Expansion Slot Cover Enww Enww Drive Positions 3Drive Positions16Disconnecting the Optical Drive Cables Removing a Drive from a Drive Bay17Disconnecting the Media Card Reader USB Cable Enww Enww Installing Additional Drives Guide Screw DeviceSystem Board Drive Connections 4System Board Drive ConnectionsInstalling a 5.25-inch Drive into an External Drive Bay Enww 27Installing a Hard Drive into the Hard Drive Bay Removing and Replacing a Removable 3.5-inch Sata Hard Drive 30Removing the Thermal Sensor Enww Enww Enww Changing from a Minitower to a Desktop Configuration Enww Changing from a Desktop to a Minitower Configuration Enww Enww Specifications Table A-1SpecificationsPower Output Battery Replacement Type Enww External Security Devices Installing a Security LockHP/Kensington MicroSaver Security Cable Lock Padlock HP Business PC Security LockEnww Front Bezel Security Figure C-6Engaging the LockEnww Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Computer Operating Guidelines and Routine Care Safety Optical Drive PrecautionsCleaning Shipping PreparationIndex Enww