Hitachi 8000 Elite manual Computer Operating Guidelines and Routine Care

Page 61

EComputer Operating Guidelines, Routine Care and Shipping Preparation

Computer Operating Guidelines and Routine Care

Follow these guidelines to properly set up and care for the computer and monitor:

Keep the computer away from excessive moisture, direct sunlight, and extremes of heat and cold.

Operate the computer on a sturdy, level surface. Leave a 10.2-cm (4-inch) clearance on all vented sides of the computer and above the monitor to permit the required airflow.

Never restrict the airflow into the computer by blocking any vents or air intakes. Do not place the keyboard, with the keyboard feet down, directly against the front of the desktop unit as this also restricts airflow.

Never operate the computer with the access panel or any of the expansion card slot covers removed.

Do not stack computers on top of each other or place computers so near each other that they are subject to each other’s re-circulated or preheated air.

If the computer is to be operated within a separate enclosure, intake and exhaust ventilation must be provided on the enclosure, and the same operating guidelines listed above will still apply.

Keep liquids away from the computer and keyboard.

Never cover the ventilation slots on the monitor with any type of material.

Install or enable power management functions of the operating system or other software, including sleep states.

Turn off the computer before you do either of the following:

Wipe the exterior of the computer with a soft, damp cloth as needed. Using cleaning products may discolor or damage the finish.

Occasionally clean the air vents on all vented sides of the computer. Lint, dust, and other foreign matter can block the vents and limit the airflow.

ENWW

Computer Operating Guidelines and Routine Care 55

Image 61
Contents Hardware Reference Guide Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix D Electrostatic Discharge Standard Configuration Features Product Features1Front Panel Components Front Panel Components2Media Card Reader Components Media Card Reader Components3Rear Panel Components Rear Panel ComponentsKeyboard Using the Windows Logo Key4Keyboard Components 5Windows Logo Key FunctionsArrow 6Serial Number and Product ID Location Serial Number LocationServiceability Features Hardware UpgradesSmart Cover FailSafe Key Unlocking the Smart Cover Lock1Removing the Smart Cover Lock Screws Removing the Computer Access Panel 3Replacing the Computer Access Panel Hardware Upgrades Replacing the Computer Access PanelRemoving the Front Bezel Removing Bezel Blanks 6Replacing the Front Bezel Replacing the Front BezelDIMMs Installing Additional MemoryDDR3-SDRAM DIMMs 1DIMM Socket Locations Populating Dimm SocketsInstalling DIMMs Enww 2Expansion Slot Locations Removing or Installing an Expansion Card11Removing an Expansion Slot Cover Enww Enww 3Drive Positions Drive PositionsRemoving a Drive from a Drive Bay 16Disconnecting the Optical Drive Cables17Disconnecting the Media Card Reader USB Cable Enww Enww Guide Screw Device Installing Additional Drives4System Board Drive Connections System Board Drive ConnectionsInstalling a 5.25-inch Drive into an External Drive Bay Enww 27Installing a Hard Drive into the Hard Drive Bay Removing and Replacing a Removable 3.5-inch Sata Hard Drive 30Removing the Thermal Sensor Enww Enww Enww Changing from a Minitower to a Desktop Configuration Enww Changing from a Desktop to a Minitower Configuration Enww Enww Table A-1Specifications SpecificationsPower Output Battery Replacement Type Enww External Security Devices Installing a Security LockHP/Kensington MicroSaver Security Cable Lock HP Business PC Security Lock PadlockEnww Figure C-6Engaging the Lock Front Bezel SecurityEnww Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Computer Operating Guidelines and Routine Care Cleaning Optical Drive PrecautionsSafety Shipping PreparationIndex Enww