Hitachi CP-X995W user manual Input Menu Description, Rgb, Black

Page 14

OPERATIONS (continued)

Input Menu

The following functions are available when INPUT is selected on the menu. Select an item with the and buttons, and start or stop operation with the and buttons. The function indicated (**) are effective on video input mode only, not on RGB input mode, except in the P.IN P. window on RGB input mode.

SETUP

INPUT

IMAGE

OPT.

ENGLISH

AUTO

 

EXECUTE

 

RGB

 

CANCEL

 

VIDEO

 

 

 

VIDEO NR

 

 

Progressive

 

 

BLACK

 

 

 

HDTV

 

 

 

 

Table 5. Input Menu

Item

Description

 

 

 

 

 

Automatic Adjustment at RGB Input: Select the EXECUTE with the

button.

 

Horizontal position (H.POSIT), vertical position (V.POSIT), clock phase (H.PHASE),

 

and horizontal size (H.SIZE) are automatically adjusted. Use with the window at

 

maximum size in the application display.

 

AUTO

Automatic Adjustment at Video Input: Select the EXECUTE with the

button. A

signal type appropriate for the input signal is selected automatically when EXECUTE

 

 

is selected automatically. Valid only when AUTO is set for VIDEO on the menu.

 

• This operation requires approximately 10 seconds. It may not function correctly with

 

some input signals. Pressing the AUTO button in this case may correct this problem.

 

• This function is the same as for the AUTO function in Basic operation.

 

 

 

Displays RGB Input Frequency: Displays the horizontal and vertical sync signal

RGB

frequencies for RGB input.

 

 

 

• Valid only at RGB input.

 

 

 

 

 

 

 

Select Video Signal Type: Select the signal type with the

and

buttons.

 

Select NTSC, PAL, SECAM, NTSC4.43, M-PAL, or N-PAL as appropriate for the

 

input signal. The selection of AUTO enables and executes the function AUTO

 

(Automatic Adjustment at Video Input), except for the N-PAL input.

 

 

• Use this function when the image becomes unstable (eg. the image becomes

VIDEO (**)

irregular, or lacks color) at VIDEO/S-VIDEO input.

 

 

• Automatic Adjustment requires approximately 10 seconds. It may not function

 

 

correctly with some input signals. Pressing the AUTO button in this case may correct

 

this problem except for the N-PAL input.

 

 

 

• For the COMPONENT VIDEO input, this function is not effective and the signal type

 

is distinguished automatically. Refer to the item HDTV of the OPT. Menu for the

 

signal of HDTV.

 

 

 

 

 

 

Set/Clear Noise Reduction Mode: Select the TURN ON / TURN OFF with the VIDEO NR / button. When the TURN ON is selected, the NR mode is active and the noise on

(**)screen of the video input will be reduced.

• Valid except for the HDTV.

Select Progressive Mode: Select the mode suitable for the input signal with the

and buttons. The TV mode and the FILM mode convert the interlaced video signal Progressive into the progressive signal. The FILM mode is adptable 2-3 Pull-Down system to the

(**)conversion.

• Use this function to raise resolution, at the interlaced video input except HDTV signal.

 

Set/Clear Black Enhancement Mode: Select the TURN ON / TURN OFF with the

BLACK(**)

/ button. When the TURN ON is selected, the black enhancement mode is

active and the contrast ratio of the screen for the video input will be raised by making

 

 

black level darker.

 

 

HDTV (**)

Select HDTV mode: Select the 1035i mode or 1080i mode suitable for the input

signal with the / button.

 

 

 

ENGLISH-13

Image 14
Contents CP-X990W / CP-X995W Contents Before USE FeaturesContents of package Before USE Part NamesENGLISH-4 Loading the Batteries Angle Adjustment InstallationInstallation of the Projector and Screen Installation ReferenceCabling InstallationCabling Plug & Play Power ConnectionExample of System Setup Operations Power onPower OFF StandbyBasic Operation Description OperationsBasic Operation Normal menu Single menu Select Mode of P.IN P. Display Press the PinP buttonSet / Clear Keystone Mode Press the Keystone button Menu Display Start/Stop Press the Menu buttonSetup Menu Setup MenuRGB Input MenuInput Menu Description BlackMyScreen Image MenuImage Menu Description MirrorSelect Menu Background Color Select with Options MenuOptions Menu Operation Start/Stop PressNo Signal Menu No Signal MenuLamp Life MaintenanceLamp Replacing the Lamp MaintenanceResetting the Lamp Timer Other Maintenance Air FiltersOSD Message TroubleshootingMessage Contents OSD MessageIndicators Message TroubleshootingIndicators Message IndicatorSymptom Possible cause Remedy SymptomSymptom Specifications SpecificationsWarranty and AFTER-SERVICE Technical Dimension DiagramSignal Connector Pin Assignment Example of computer signal TechnicalInitial set signals USB Mouse Connection to the Mouse ControlPS/2, ADB or Serial Mouse PS/2 MouseADB Mouse Serial MouseRS-232C communication Communications settingCommand data ProtocolUsing the projector default settings Reset Command Requesting projector status Get commandChanging the projector settings Set command Increasing the projector setting value Increment commandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL RGB Be EF For the Customers in Canada Pour les utilisateurs au Canada Regulatory NoticesFCC Statement Warning Hitachi Business Systems Nordic Hitachi Europe GmbHHitachi Sales Europe GmbH Hitachi France
Related manuals
Manual 39 pages 2.17 Kb