INSTALLATION (continued)
Power Connection
Use the correct power cord depending on the power outlet to be used.
Connect the AC inlet of the projector to the power outlet firmly by the power cord.
CAUTION • Be carful in handling the power 
cord according to instructions of the accompanying manual "SAFETY INSTRUCTIONS" and this manual.
•Connect the power cord firmly. Avoid using a loose, unsound outlet or failed contact.
Power outlet
AC Inlet 
Power Cord
Example of System Setup
Computer
(desktop type) | Computer |
(notebook type)
Recorder
|
| DIGTAL |
|
|
|
|
|
| RGB IN | 2 | |
| COMPO |
|
|
| |
|
| NENT |
|
|
|
|
| VIDEO | RGB OUT |
| CONTROL |
VIDEO |
|
|
|
|
|
(MONO)/L |
|
|
|
| |
AUDIO |
|
|
|
|
|
| R | CB/PB | AUDIO | IN | AUDIO |
USB |
| RGB 1 | RGB 2 | OUT | |
DIGITAL
CR/PR
Display Monitor
Speaker with amplifier
DVD Player
Computer (desktop type)
NOTE • When connecting with a notebook computer, set the proper RGB external image output (setting CRT display or simultaneous display of LCD and CRT). Please read instruction manual of the notebook for more information.
Plug & Play
This projector is VESA DDC 1/2B compatible. Plug & play is possible by connecting to a computer that is VESA DDC (Display Data Channel) compatible.
Please use this function by connecting the RGB cable with RGB IN 1 terminal (DDC 1/2B compatible), or by connecting a DVI cable with DVI terminal (DDC 2B compatible). Plug & play may not operate by other connections.
NOTE • Plug & play is a system configured with peripheral equipment including a computer, display and an operating system.
•This projector is recognized as a plug & play monitor. Use the standard display drivers.
•Plug & play may not operate by the computer to connect. Use the RGB IN 2 terminal if plug & play does not operate correctly.