Hitachi CP-X995W user manual Image Menu Description, MyScreen, Mirror, Posit

Page 15

OPERATIONS (continued)

Image Menu

The following adjustments and settings are available when IMAGE is selected on the menu. Select an item with the and buttons, and start or stop operation with the and buttons.

SETUP INPUT IMAGE OPT.

BLANK

MyScreen

START UP

ORIGINAL

MyScreen

 

MIRROR

 

P.IN P. POSIT

 

P.IN P. INPUT

 

GAMMA

 

Table 6. Image Menu

Item

Description

 

Select Blank Screen: Select the screen in case of the BLANK mode with the /

 

button.The selected one (MyScreen, ORIGIAL or one colors) is displayed when the

 

BLANK mode is ON.

BLANK

MyScreen is a mode that the customer-customized screen is displayed. This is the

blue screen at the factory setting. Refer to the description of MyScreen below.

 

 

ORIGINAL is a mode that the factory fixed screen is displayed.

 

• When MyScreen or ORIGIAL is selected, the screen is going to the black after

 

several minutes.

Select Start Up Screen:Select the screen in case of no signal input with the / button. The selected one (MyScreen, ORIGIAL or TURN OFF) is displayed when no signal is input

MyScreen is a mode that the customer-customized screen is displayed. This is the START UP blue screen at the factory setting. Refer to the description of MyScreen below.

ORIGINAL is a mode that the factory fixed screen is displayed. TURN OFF displays the blue screen.

When MyScreen or ORIGIAL is selected, the screen is going to the black after several minutes.

 

Set MyScreen Mode: Select the EXECUTE with the

button to display the

 

MyScreen menu and set the MyScreen mode for BLANK and START UP functions.

 

ESC clears and closes the menu box.

 

 

 

 

NORM. is default of the MyScreen menu.

 

 

 

 

FREEZE freezes the image and displays the frame to capture.

 

 

Press the

button after freeze to go to the MyScreen Capture Position mode.

 

In the MyScreen Capture Position mode, the buttons

, , and

allow to

 

move the frame to capture.

 

 

 

MyScreen

After adjusting the position, press the KEYSTONE button to go to the MyScreen

Display Size mode.

 

 

 

 

To cancel freezing and return to the NORM. of the MyScreen menu, press the

 

RESET button.

 

 

 

 

In the MyScreen Display Size mode, select the magnification x1, x2 or FULL with the

 

button

/ .

 

 

 

 

After selecting the magnification, press the KEYSTONE button to go to the CAPT.

 

mode and start capturing.

 

 

 

 

To return to the MyScreen Capture Position mode, press the RESET button.

 

CAPT. executes a capturing the image. It requires about 20 seconds. After capturing,

 

the captured image will be displayed for about 10 seconds.

 

 

 

 

 

 

MIRROR

Select Mirror Status: Select mirror status with

/

button.

 

P. IN P.

Select Position of P. in P. Display : Press the

/

button.

 

 

POSIT

 

 

• P.IN P. function superimposes a video image over RGB or DVI signals.

 

P. IN P. Select signal of P. in P. Display : Press the / button.

INPUT VIDEO S-VIDEO COMPONENT

GAMMA

Select Gamma Mode: Select the gamma mode with the / button.

NORMAL

CINEMA DYNAMIC

 

ENGLISH-14

Image 15
Contents CP-X990W / CP-X995W Contents Features Contents of packageBefore USE Part Names Before USEENGLISH-4 Loading the Batteries Installation Reference InstallationInstallation of the Projector and Screen Angle AdjustmentInstallation CablingCabling Power Connection Example of System SetupPlug & Play Standby Power onPower OFF OperationsOperations Basic OperationBasic Operation Description Menu Display Start/Stop Press the Menu button Select Mode of P.IN P. Display Press the PinP buttonSet / Clear Keystone Mode Press the Keystone button Normal menu Single menuSetup Menu Setup MenuBlack Input MenuInput Menu Description RGBMirror Image MenuImage Menu Description MyScreenOperation Start/Stop Press Options MenuOptions Menu Select Menu Background Color Select withNo Signal Menu No Signal MenuMaintenance LampLamp Life Maintenance Resetting the Lamp TimerReplacing the Lamp Air Filters Other MaintenanceOSD Message TroubleshootingMessage Contents OSD MessageIndicator TroubleshootingIndicators Message Indicators MessageSymptom SymptomSymptom Possible cause Remedy Specifications SpecificationsWarranty and AFTER-SERVICE Dimension Diagram Signal Connector Pin AssignmentTechnical Technical Example of computer signalInitial set signals PS/2 Mouse Connection to the Mouse ControlPS/2, ADB or Serial Mouse USB MouseSerial Mouse ADB MouseProtocol Communications settingCommand data RS-232C communicationIncreasing the projector setting value Increment command Requesting projector status Get commandChanging the projector settings Set command Using the projector default settings Reset CommandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL RGB Be EF Regulatory Notices FCC Statement WarningFor the Customers in Canada Pour les utilisateurs au Canada Hitachi France Hitachi Europe GmbHHitachi Sales Europe GmbH Hitachi Business Systems Nordic
Related manuals
Manual 39 pages 2.17 Kb