Hitachi CP-X995W user manual No Signal Menu

OPERATIONS (continued)

No Signal Menu

The same adjustments and settings are available with the Image and Options menus when the MENU button is pressed during display of the “NO INPUT IS DETECTED ON ***” or “SYNC IS OUT OF RANGE ON ***” message while no signal is received.

Table 8. No Signal Menu

VOLUME

BLANK

START UP

MIRROR MENU COLOR

LANGUAGE AUTO OFF SYNC ON G

WHISPER

16

Item Description

Volume Adjustment: Reduce VOLUME ↔ Increase VOLUME

•When this function is used, audio input is automatically switched to video. The

VOLUME	audio input can be switched by moving the DISK PAD left and right during the
	display of the volume adjustment bar. The volume adjustment bar is displayed by
	pressing VOLUME	or VOLUME	button.
	Select Blank Screen: Select the screen in case of the BLANK mode with the
	/ button.The selected one (MyScreen, ORIGIAL or one colors) is displayed
	when the BLANK mode is ON.
BLANK	MyScreen is a mode that the customer-customized screen is displayed. This is
	the blue screen at the factory setting. Refer to the description of MyScreen below.
	ORIGINAL is a mode that the factory fixed screen is displayed.

•When MyScreen or ORIGIAL is selected, the screen is going to the black after several minutes.

Select Start Up Screen:Select the screen in case of no signal input with the / button. The selected one (MyScreen, ORIGIAL or TURN OFF) is displayed when no signal is input

MyScreen is a mode that the customer-customized screen is displayed. This is

START UP the blue screen at the factory setting. Refer to the description of MyScreen below. ORIGINAL is a mode that the factory fixed screen is displayed.

TURN OFF displays the blue screen.

•When MyScreen or ORIGIAL is selected, the screen is going to the black after several minutes.

MIRROR	Operation Start/Stop: Press the	/	button.
	Select Mirror Status: Select the mirror status with the and				buttons.
MENU COLOR	Select Menu Background Color: Select the color with the				and	buttons.
LANGUAGE	Operation Start/Stop: Press the	/	button.
	Select Menu Display Language: Select the language with the				and	buttons.
	Operation start/stop: Press the	/	button.
	Set AUTO OFF: Set 1~99 minutes with the and			buttons. The system
AUTO OFF	automatically enters the standby mode when a signal is not received for the set
	time.
	Clear AUTO OFF: Select the STOP (0 min.) with the			button. When the STOP
	is selected the system does not enter the standby mode even if no signal is
	received.
	Operation Start/Stop: Press the	/	button.
	SYNC ON G Valid: Select the TURN ON with the			button.
SYNC ON G	SYNC ON G Invalid: Select the TURN OFF with the			button.
	• May not be displayed correctly with some input signals when the SYNC ON G is
	valid. In such cases, remove the signal connector so that no signal is received,
	set the SYNC ON G to invalid, and reconnect the signal.

Set / Crear WHISPER Mode: Press the / button. When the WHISPER is

WHISPER selected, the WHISPER mode is active. In the WHISPER mode, acoustic noise level from the unit is reduced, and brightness level on screen is a little lower.

ENGLISH-16