NEC N8580-31 user manual Before Installing

Page 6

3. Attention from the Operational and Maintenance Points of View

Please charge the battery.

The battery may not be fully charged when your UPS arrives. Please allow four to six hours for charging.

To turn off the UPS, set the Enable switch to OFF.

Pressing the Off button, does not turn off the UPS. To manually turn it off, set the Enable switch to OFF.

When the UPS has been unused or in storage, charge the battery before use.

The battery’s charge will dissipate with disuse. Allow four to six hours to charge the battery before using.

Be careful in choice of circuit breaker.

Be careful of voltage sensitivity when setting up a circuit breaker on the input side of the UPS. If there is current leakage from the loads, set the sensitivity higher.

Do not change the frequency of the UPS.

The frequency setting is either 50 Hz. or 60 Hz. It is preset and should not be changed.

Use reliable input power.

The AC line voltage to the UPS should be reliable, without large fluctuations.

Set up the environment for the UPS.

The UPS should be placed in an environment within its temperature and humidity specifications and avoiding direct sunlight.

Allow airflow around the UPS.

The airflow around the UPS should be adequate to provide cooling.

Replace the battery.

Replace the battery at the recommended intervals.

Do not operate the UPS with its cover removed.

Using the UPS without its cover is a safety and electrical hazard.

Exercise caution when changing or adding loads.

Although loads may be changed or added while the UPS is in operation, care should be taken not to overload the UPS or to create an electrical hazard.

4. Before Installing

Inspection

Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage. The packaging is recyclable; save it for reuse or dispose of it properly.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void

the warranty.

Placement

Install the UPS in a protected area that is free of excessive dust and has adequate air flow. Do not operate the UPS where the temperature and humidity is outside the specified limits.

3

Page 5 Page 7
Image 6
Page 5 Page 7
Contents NEC 500 UPS About Your New UPS Table of Contents Safety Electrical Safety Handling SafetyBefore Installing Name and Function of Parts Shutdown Mode Replace BatteryBattery Charge Bar Graph Load Bar GraphInstallation Rear ViewOperating Instructions Function Automatic Voltage RegulationAC Line to Boost Boost to AC Line Abnormal Conditions and Protection Functions Battery DisconnectedService Smart Boost / Smart TrimTroubleshooting Problem and Possible Cause SolutionStorage Maintenance and ChecksBattery Life Daily CheckSpecifications N8580-31 500 VANEC Corporation

N8580-31 specifications

The NEC N8580-31 is a powerful and versatile telecommunications solution primarily designed for enterprise environments. This system stands out due to its robust architecture that supports diverse communication needs, making it an ideal choice for organizations looking to enhance their connectivity and operational efficiency.

One of the key features of the NEC N8580-31 is its high availability, ensuring continuous operation and minimal downtime. This is crucial for businesses that rely on uninterrupted communication to maintain productivity. The system is designed with redundancy in mind, incorporating backup power supplies and failover mechanisms to guarantee seamless service.

In terms of technology, the N8580-31 employs advanced VoIP (Voice over Internet Protocol) capabilities, enabling organizations to leverage their existing IP networks for voice communication. This feature not only reduces costs associated with traditional telephony but also enhances flexibility, allowing users to access communication tools from various devices and locations.

The NEC N8580-31 supports a wide range of telephony features, including call forwarding, voicemail, and conferencing. These features are complemented by sophisticated call management tools that enable organizations to monitor and analyze call traffic, ensuring efficient use of resources and improved customer service.

Another notable characteristic of the NEC N8580-31 is its scalability. As businesses grow, their communication needs often change. The N8580-31 can be easily expanded to accommodate additional users and features without significant upgrades or overhauls. This scalability is vital for businesses aiming to future-proof their investment in communication technologies.

The system also integrates seamlessly with various third-party applications and platforms, enhancing its functionality and enabling organizations to customize their communication solutions. This level of integration supports workflows and processes, allowing for improved collaboration among team members.

Moreover, the NEC N8580-31 prioritizes security, incorporating multiple layers of protection to safeguard sensitive communication and data. This is particularly important in today’s digital landscape, where data breaches and cyber threats are prevalent.

In summary, the NEC N8580-31 is a cutting-edge telecommunications solution that combines reliability, scalability, and advanced features. Its capabilities in VoIP, call management, and integration with other applications position it as a leading choice for enterprises seeking to enhance their communication systems while ensuring security and operational efficiency.
Top Page Image Contents