NEC user manual Specifications, N8580-31 500 VA, NEC Corporation

Page 15

Specifications

 

N8580-31 500 VA

Acceptable input voltage

0 - 160 VAC

Output voltage

90 - 110 VAC

Input Protection

Resettable circuit breaker

Frequency limits (on-line operation)

50 or 60 Hz, +2%, -4%

Transfer time

2 ms (normal) 4 ms (maximum)

Maximum load

500 VA / 320 W

On-battery output voltage

100 VAC

On-battery frequency

50 or 60, ± 0.1 Hz; unless synchronized to utility during brownout.

On-battery waveshape

Low-distortion sine wave

Protection

Overcurrent and short-circuit protected, latching shutdown on overload.

Noise Filter

Normal and common mode EMI/RFI suppression, 100 kHz to 10 MHz

Battery type

Spill proof, maintenance free, sealed lead-acid

Typical battery life

life varies; typical 2 years, depending on number of discharge cycles and ambient

 

temperature

Typical recharge time

2 to 5 hours from total discharge

Operating temperature

0 to +40 ºC (+32 to +104 ºF)

Storage temperature

-15 to +45 ºC (+5 to +113 ºF)

Operating and storage relative humidity

5 to 95%, non-condensing

Operating elevation

0 to +3,000 m (0 to +10,000 ft)

Storage elevation

0 to +15,000 m (0 to +50,000 ft)

Electromagnetic immunity

IEC 801-2 level IV, 801-3 level III, 801-4 level IV

Audible noise in dBA at 1 m (3 ft)

< 45

Size (H x W x D)

15.8 x 13.7 x 35.8 cm.

 

(6.2 x 5.4 x 14.1 in.)

Weight - net (shipping)

11.6 (12.9) kg.

 

25.5 (28.5) lb.

Safety approvals

Listed to UL 1778

EMC verification

VCCI Class 2

© NEC Corporation 1998

990-5021, Revision 1, 12/98

N8580-31

12

Image 15
Contents NEC 500 UPS About Your New UPS Table of Contents Safety Handling Safety Electrical SafetyBefore Installing Name and Function of Parts Load Bar Graph Replace BatteryBattery Charge Bar Graph Shutdown ModeRear View InstallationOperating Instructions Function Automatic Voltage RegulationAC Line to Boost Boost to AC Line Smart Boost / Smart Trim Battery DisconnectedService Abnormal Conditions and Protection FunctionsProblem and Possible Cause Solution TroubleshootingDaily Check Maintenance and ChecksBattery Life StorageSpecifications N8580-31 500 VANEC Corporation

N8580-31 specifications

The NEC N8580-31 is a powerful and versatile telecommunications solution primarily designed for enterprise environments. This system stands out due to its robust architecture that supports diverse communication needs, making it an ideal choice for organizations looking to enhance their connectivity and operational efficiency.

One of the key features of the NEC N8580-31 is its high availability, ensuring continuous operation and minimal downtime. This is crucial for businesses that rely on uninterrupted communication to maintain productivity. The system is designed with redundancy in mind, incorporating backup power supplies and failover mechanisms to guarantee seamless service.

In terms of technology, the N8580-31 employs advanced VoIP (Voice over Internet Protocol) capabilities, enabling organizations to leverage their existing IP networks for voice communication. This feature not only reduces costs associated with traditional telephony but also enhances flexibility, allowing users to access communication tools from various devices and locations.

The NEC N8580-31 supports a wide range of telephony features, including call forwarding, voicemail, and conferencing. These features are complemented by sophisticated call management tools that enable organizations to monitor and analyze call traffic, ensuring efficient use of resources and improved customer service.

Another notable characteristic of the NEC N8580-31 is its scalability. As businesses grow, their communication needs often change. The N8580-31 can be easily expanded to accommodate additional users and features without significant upgrades or overhauls. This scalability is vital for businesses aiming to future-proof their investment in communication technologies.

The system also integrates seamlessly with various third-party applications and platforms, enhancing its functionality and enabling organizations to customize their communication solutions. This level of integration supports workflows and processes, allowing for improved collaboration among team members.

Moreover, the NEC N8580-31 prioritizes security, incorporating multiple layers of protection to safeguard sensitive communication and data. This is particularly important in today’s digital landscape, where data breaches and cyber threats are prevalent.

In summary, the NEC N8580-31 is a cutting-edge telecommunications solution that combines reliability, scalability, and advanced features. Its capabilities in VoIP, call management, and integration with other applications position it as a leading choice for enterprises seeking to enhance their communication systems while ensuring security and operational efficiency.