NEC N8580-31 user manual Installation, Rear View

Page 9

2) Rear View

500 VA

Computer Interface Port

Power management software and interface kits can be used with this UPS. Use only kits supplied or approved by the manufacturer. If used, connect the interface cable to the 9-pin computer interface port on the back panel of the UPS. Secure the connector’s screws to complete the connection.

Ground Leads to TVSS Connector

The UPS features a convenient screw for connecting the ground lead on “transient voltage surge-suppression” (TVSS) devices such as telephone and network line protectors. The TVSS connector provides grounding through the UPS’s power cord ground conductor. To make a connection to the TVSS connector, loosen the screw and connect the surge suppression device’s ground lead. Tighten the screw to secure the lead.

6. Installation

1. Install the UPS

Plug the power cord into the UPS and into the AC voltage.

2.Connect the Equipment

Do not power laser printers through the UPS.

Use your equipment’s power cords to connect to the UPS.

Turn on all connected equipment.

3.Charge the battery

The UPS charges its battery whenever it is connected to utility power. The battery will charge fully during the first 4 hours of normal operation. Do not expect full runtime during this initial charge period.

4. Connect the Computer Interface Port

5. Connect the Ground Leads to the TVSS Connector (Optional)

6.Power the Equipment

With the UPS plugged in, press and release the large upper on/test button to supply power to the equipment plugged into the switched outlets.

Note: The UPS will not power up initially unless the AC voltage is in the normal operating range.

6

Image 9
Contents NEC 500 UPS About Your New UPS Table of Contents Safety Handling Safety Electrical SafetyBefore Installing Name and Function of Parts Battery Charge Bar Graph Replace BatteryShutdown Mode Load Bar GraphRear View InstallationOperating Instructions Function Automatic Voltage RegulationAC Line to Boost Boost to AC Line Service Battery DisconnectedAbnormal Conditions and Protection Functions Smart Boost / Smart TrimProblem and Possible Cause Solution TroubleshootingBattery Life Maintenance and ChecksStorage Daily CheckSpecifications N8580-31 500 VANEC Corporation

N8580-31 specifications

The NEC N8580-31 is a powerful and versatile telecommunications solution primarily designed for enterprise environments. This system stands out due to its robust architecture that supports diverse communication needs, making it an ideal choice for organizations looking to enhance their connectivity and operational efficiency.

One of the key features of the NEC N8580-31 is its high availability, ensuring continuous operation and minimal downtime. This is crucial for businesses that rely on uninterrupted communication to maintain productivity. The system is designed with redundancy in mind, incorporating backup power supplies and failover mechanisms to guarantee seamless service.

In terms of technology, the N8580-31 employs advanced VoIP (Voice over Internet Protocol) capabilities, enabling organizations to leverage their existing IP networks for voice communication. This feature not only reduces costs associated with traditional telephony but also enhances flexibility, allowing users to access communication tools from various devices and locations.

The NEC N8580-31 supports a wide range of telephony features, including call forwarding, voicemail, and conferencing. These features are complemented by sophisticated call management tools that enable organizations to monitor and analyze call traffic, ensuring efficient use of resources and improved customer service.

Another notable characteristic of the NEC N8580-31 is its scalability. As businesses grow, their communication needs often change. The N8580-31 can be easily expanded to accommodate additional users and features without significant upgrades or overhauls. This scalability is vital for businesses aiming to future-proof their investment in communication technologies.

The system also integrates seamlessly with various third-party applications and platforms, enhancing its functionality and enabling organizations to customize their communication solutions. This level of integration supports workflows and processes, allowing for improved collaboration among team members.

Moreover, the NEC N8580-31 prioritizes security, incorporating multiple layers of protection to safeguard sensitive communication and data. This is particularly important in today’s digital landscape, where data breaches and cyber threats are prevalent.

In summary, the NEC N8580-31 is a cutting-edge telecommunications solution that combines reliability, scalability, and advanced features. Its capabilities in VoIP, call management, and integration with other applications position it as a leading choice for enterprises seeking to enhance their communication systems while ensuring security and operational efficiency.