NEC MT1060 user manual Projector Options

Selecting Gamma Correction Mode

Use the or	buttons to choose one mode from three options.
Each mode is recommended for :
Dynamic	For true color reproduction of natural tones
Natural	Normal settings
Black Detail ....	For dark portions of a picture

Selecting Color Correction

Adjusts red, green, blue, yellow, magenta, cyan and color gain each independently to correct the tint on whole screen.

Adjusting Color Temperature and White Balance

This feature adjusts the color temperature using the slide bar.

Checking "Color Temperature" enables the color temperature slide bar and disables the “White Balance” button.

Clear “Color Temperature” and press the White Balance button to access the Contrast/Brightness adjustment for each R, G, and B.

NOTE: "Color Temperature" and "White Balance" are a trade-off. The White Balance is not available for Viewer and LAN.

Selecting Base Setting

This feature allows you to use color correction or gamma values as reference data to optimize for various types of images.You can select one of the following five settings.

• Presentation	• sRGB	• Graphic
• Video	• Movie

Projector Options

Using 3D Reform

This feature corrects trapezoidal distortion so that the projected im- age is rectangular.

Two options are available for correcting procedures.

You can save adjustment settings by using the 3D Reform Save op- tion on Setup (See page E-45).

Cornerstone

See page E-21

Keystone

1.	Press the SELECT	button to adjust the horizontal keystone.
2.	Press the SELECT	button to select "Vertical".
3.	Press the SELECT	button to adjust the vertical keystone.

4.After completing, press the ENTER button. This will return to the menu screen.

*When "Resolution" is set to "Native", "Cornerstone" and "Keystone" are not available.

E-40