NEC user manual Specifications, Model Number MT1065/MT1060 Optical

Page 61

SPECIFICATIONS

This section provides technical information about the MT1065/MT1060 Projector's performance

Model Number

MT1065/MT1060

Optical

 

LCD Panel

MT1065: 1.0" p-Si TFT active-matrix with Micro Lens Array

 

MT1060: 1.0" p-Si TFT active-matrix

Resolution

1024×768 pixels up to UXGA with Advanced AccuBlend

Lens

Motorized zoom and focus:

 

F1.74 – 2.18 f=30.8mm – 41.6mm

Lamp

275 W DC standard / 160 W DC (Optional Extended life lamp)

Color Image Sensor

23,040 pixels (160 dots×144 lines)

Image Size

25 inches – 500 inches (0.6 m – 12.7 m) diagonal

Projection Distance

2.96 ft – 51.23 ft / 10.0 m (Tele) – 15.6 m (Wide)

Projection Angle

Tele : 8.2° – 8.6° Wide : 9.8° – 10.5°

Electrical

 

Inputs

2 RGB (D-Sub 15 Pin/BNC×5), 1 DVI, 1 S-Video, 1 Video, 2 PC Card, 3 Stereo Mini Audio, 2 (L/R) RCA Audio,

 

1 PC Control, 1 (L/R) RCA Audio

Outputs

1 RGB, 1 Stereo Mini Audio

USB Port

1 A Type, 1 B Type

Video Compatibility

NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM, HDTV:1080p, 1080i, 720p, 576p, 576i, 480p, 480i

 

(w/optional cable)

Scan Rate

Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over) / Vertical: 48 Hz to 120 Hz

Video Bandwidth

RGB: 80 MHz (-3dB)

Color Reproduction

16.7 million colors simultaneously, Full color

Horizontal Resolution

NTSC / NTSC4.43/PAL/PAL-M/PAL-N/PAL60: 550 TV lines

 

SECAM: 350 TV lines

 

YCbCr: 800 TV lines

 

RGB: 1024 dots (H)×768 dots (V),

External Control

RS232, IR, USB, LAN (optional)

Sync Compatibility

Separate Sync / Composite Sync / Sync on G

Built-in Speakers

5W×2 (stereo)

Power Requirement

100 - 120V AC / 200 - 240V AC, 50 / 60 Hz

Input Current

4.0A (100 - 120V AC) / 2.0A (200 - 240V AC)

Power Consumption

1.0W in Standby mode/390W in Lamp Normal mode/320W in Lamp Eco mode

 

(250W in use of the optional Extended Life lamp)

Mechanical

 

Installation

Orientation: Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear

Dimensions

13.2" (W)×4.5" (H)×12.7" (D)

 

334mm (W)×115mm (H)×323mm (D)

 

(not including protrusions)

Net Weight

13.0 lbs / 5.9 kg

Environmental Considerations

 

Operational Temperatures : 32° to 95°F (0° to 35°C), 20% to 80% humidity (non-condensing)

Storage Temperatures : 14° to 122°F (-10°to 50°C), 20% to 80% humidity (non-condensing)

Regulations

UL Approved (UL 1950, CSA 950)

 

Meets DOC Canada Class B requirements

 

Meets FCC Class B requirements

 

Meets AS/NZS3548 Class B

 

Meets EMC Directive (EN55022:1998, EN55024-1998, EN61000-3-2, EN61000-3-3)

 

Meets Low Voltage Directive (EN60950, TUV GS Approved)

For additional information visit:

US : http://www.necvisualsystems.com

Europe : http://www.nec-europe.com/

Global : http://www.nec-pj.com/

LCD panels are inherently susceptible to pixel defects.

For additional information regarding pixel data, please contact your local NEC sales office.

The specifications are subject to change without notice.

E-57

 

Image 61
Contents MT1065/MT1060 Paiement des frais de transport Entfernungs- oder Installationsforderungen und -kostenBezahlung von Transportkosten Limited Warranty USA and Canada only Declaration of Conformity MT1065/MT1060 Safety Cautions Lamp Replacement Fire and Shock PrecautionsGuarantee policy Whats in the Box?Table of Contents Introduction Features youll enjoyIntroduction to the Projector Attaching the lens cap Part Names of the ProjectorCarrying the Projector Select Top FeaturesTerminal Panel Features On the screen using the Select Part Names of the Remote ControlRGB Viewer Remote Control Precautions Battery InstallationOperating Range for Wireless Remote Control Using the Remote Control in Wired OperationSetting Up the Screen and the Projector Installation and ConnectionsSelecting a Location Do not attempt to install the projector yourself Distance ChartThrow Distance and Screen Size Reflecting the ImageConnecting Your PC or Macintosh Computer When Viewing a DVI Digital SignalConnecting to RGB 2 in connectors Connecting Your PC with a DVI ConnectorTo connect Scart output RGB Connecting an External MonitorDVD player Connecting Your DVD PlayerConnecting the Supplied Power Cable Connecting Your VCR or Laser Disc PlayerTurning on the Projector Projecting AN Image Basic OperationUsing the Remote Control Adjusting the Picture Size and PositionAdjust the Tilt Foot Selecting a SourceUsing Auto Focus When using the USB connected to the projectorFocus Use the Focus Button +/- to obtain the best focusConfirmation screen is displayed When using the remote control or cabinet buttonsUsing the Laser Pointer Turning Up or Down VolumeAdjusting the Image Using Auto Adjust Optimizing RGB Picture AutomaticallyTurning off the Projector Setting the function switchTo turn off the projector Using the Remote Mouse Function Convenient FeaturesFreezing a Picture Using the PointerGetting the On-line Help Operate the Menus using the USB mouse Using the USB Mouse Using the USB HUB FunctionMaking Freehand Drawings on a Projected Image ChalkBoard Changing Background LogoMaking the Most out of the Viewer Function Using the ViewerOperating the Viewer Function from the Projector playback When the tool bar is not displayedProjecting slides Viewer Switching to Slides Directly from Other Input Modes Auto Play ModeViewing Digital Images PreparationsDeleting Captured Images Using the PC Card Files Fucntion PC Card FilesTo delete captured images Using the Menus Using ON-SCREEN MenuDefault Custom Menu items are Basic Menu OperationAdvanced Menu Menu treeOperation Mode Select WEP Menu Elements Menu Descriptions & Functions Entering Alphanumeric Characters by Using the MenuSource Select Picture not available for Viewer and LAN Entry Edit CommandSound Image OptionsPicture Management Projector Options Using Adapting Color Correction Wall Color Correction Palette Menu Setup Resolution manually User can adjust the image display functions HoriSelecting Lamp Mode and Lamp Type Lamp Setting Selecting Auto Functions Selecting Aspect Ratio and Position for Screen ScreenNetwork Type required for wireless only Setting LAN ModeNications may be monitored by someone WEP for Wireless onlyUses 64-bit datalength for secure transmission Pared to use of 64bit datalength encryptionStatus Setting a PasswordEntry DeleteSecurity To enable Security, use the SelectTo delete PC card data you registered Tools Returning to Factory DefaultHelp Replacing the Lamp MaintenanceTo replace the lamp Cleaning or Replacing the Filter CleaningCleaning the Cabinet and the Lens Vacuum the filter-through the filter coverPower Indicator TroubleshootingStatus Indicator Lamp IndicatorWhen using the Viewer function Common Problems & Solutions Check These ItemsContents of PC Card are damaged Image isn’t square toModel Number MT1065/MT1060 Optical SpecificationsPin Assignments of D-Sub RGB Input Connector Cabinet DimensionsMini D-Sub 15 Pin Connector Pin No RGB Signal Analog YCbCr SignalCompatible Input Signal List Using Software Keyboard PC Control Connector D-SUB 9PPC Control Codes and Cable Connection Cable ConnectionOverview Operation Using an Http BrowserPreparation Before Use Handling of the Address for Operation via a BrowserServices offered with TravelCare TravelCare a service for international travelersTerm of warranty TravelCare GuideAbba Electronics L.L.C Asia and Middle EastApplication Sheet for TravelCare Service Program Condition of your TravelCare Service Program 7N8P1912