Using A Tabletop Or Cart
1. Place your LCD projector on a flat level surface at the
optimal distance from the screen or wall so you realize the (A) Top view size image you want. (Avoid having bright room lighting or
sun light directly on the screen or wall where you'll be projecting the image.)
2.Connect the power cable, remove the lens cap and turn the projector on. (If no input signal is available, the projector will display a background image.)
screen
3.Ensure that the projector is square to the screen.
4.Move the projector left or right to center the image horizon- tally on the screen. (A)
5.To center the image vertically (B), lift the front edge of the projector and press the buttons on the front of the projector, just above the feet, to release the
6.If a trapezoidal distortion appears on the screen, use the KEYSTONE button on the remote control or select Key- stone from the menu to correct the distortion.
If necessary, adjust the front or rear feet so that the lens surface is parallel to the screen. If you use the projector with the screen tilted, the picture will be distorted. Each of the rear feet height can be changed up to 4 mm.
7.Increase or reduce the size of the projected image by press- ing the "Zoom" (+) or
(B) Side view
screen |