NEC MT830 Slide Button, Magnify Button, Keystone Button, Focus Button, Zoom Button, Remote Jack

19 Slide Button

Press (+) to advance the next file or slide and (-) to return to the previous file or slide. (the optional MT Viewer board required)

20 Magnify Button

Use the (+) or (-) button to adjust the image size up to 400%. When the Pointer is displayed, the magnified image is dis- played at the center of the Pointer.

When the Pointer is not displayed, the magnified image is displayed at the center of the screen.

21 Keystone Button

Press the (+) or (-) button to correct the keystone (trapezoi- dal) distortion, and make the image square.

22 Focus Button

Press the (+) or (-) button to adjust the focus.

23 Zoom Button

Press the (+) button to zoom in and the (-) button to zoom out.

24 Remote Jack

Connect your remote control cable here for wired operation.

NOTE: You cannot use Menu and Pointer at the same time.

Remote Control Precautions

•Do not look into the laser pointer while it is on.

•Do not point the laser beam at a person.

•When the cable is connected to the remote control, it will not work in the wireless mode.

•Handle the remote control carefully.

•If the remote control gets wet, wipe it dry immediately.

•Avoid excessive heat and humidity.

•If you will not be using the remote control for a long time, remove the batteries.

•Do not mix new and old or different types of batteries.

OFF POWER ON

VIDEO S-VIDEO

RGB 1 RGB 2 PC CARD

MENULASER

–+

R-CLICK/CANCEL

POINTER PIC-MUTE FREEZE

MAGNIFY	SLIDE	19
		VOLUME
+	+	+
20
–	–	–
ZOOM	FOCUS KEYSTONE
+	+	+
23		21
–	–	–
		22

24

E-13