NEC MT830 user manual Top Features

Top Features

1Power Button

Use this button to turn the power on and off when the Main Power Switch is on and the LCD projector is in standby.

2Menu Button

Displays the on- screen menu.

3Select (▲▼◀ ▶) / (+)(–) Buttons

Select:	After you press the “Menu” button, use the ▲ or
	▼ button to select the menu icon of the item you
(▲▼◀ ▶)	wish to adjust.
(+)(–):	Use these buttons while you' re in the Image
	Adjust mode to change the level of a selected
	menu item. These buttons are also used to set an
	item in the Power or Settings menus.

4Enter Button

Executes your menu selection.

5(+) (–) Zoom Buttons

Press the (+) button to make the image larger; press (–) to make the image smaller.

6(+) (–) Focus Buttons

Press the (+) or (–) buttons to focus an image.

7Power Indicator

When this indicator is green, the LCD projector is on; when the indicator is amber, it is standing by.

8Status Indicator

When this is lit red continually, it's warning you that the projection lamp has exceed 2000 hours of service. After this light appears, it is advisable to replace the projection lamp as soon as possible.(See page E-37)

In addition the message "LAMP USAGE XX HOURS" appears continually when the on-screen menu is not dis- played.

If this light blinks red rapidly, it indicates that either the lamp cover or filter cover is not attached properly. See the Status Light Messages on page E-39 for more details.

8

7

MENU

SELECT

–+

ENTER

STATUS + +

POWER

ON/OFF – –

ZOOM FOCUS

1 5

2

3

4

6

E-8