NEC NP500WG, NP600G Network Setting by Using an Http Browser, Overview, Preparation Before Use

Page 50

4. Convenient Features

7Network Setting by Using an HTTP Browser

Overview

Connecting the projector to a network allows the Alert Mail setting (→ page 43) and the projector control from a computer via the network.

To perform the projector control from a web browser, you must have an exclusive application installed on your com- puter.

The IP address and subnet mask of the projector can be set on the Network Setting screen of the web browser by using an HTTP server function. Please be sure to use “Microsoft Internet Explorer 6.0” or a higher version for the web browser. (This device uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. The setting method will vary depending on the version of browser. Please refer to the help files and the other information provided in your software.)

Access is gained to the HTTP server function by starting the Web browser on the computer via the network connected to the projector and enter the following URL.

•Network Setting

http://<the projector’s IP address>/index.html

•Alert Mail Setting

http://<the projector’s IP address>/lanconfig.html

TIP:

•The default IP address is “192.168.0.10”.

•The exclusive application can be downloaded from our website.

NOTE:

•If the PROJECTOR NETWORK SETTINGS screen does not appear in the web browser, press the Ctrl+F5 keys to refresh your web browser (or clear the cache).

•The display’s or button’s response can be slowed down or operation may not be accepted depending the settings of your network. Should this happen, consult your network administrator.

The projector may not respond if its buttons are repeatedly pressed in rapid intervals. Should this happen, wait a moment and repeat. If you still can’t get any response, turn off and back on the projector.

Preparation Before Use

Connect the projector to a commercially available LAN cable before engaging in browser operations. (→ page 20) Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the setting method. Although the type of proxy server will be a factor, it is possible that items that have actually been set will not be displayed depending on the effectiveness of the cache, and the contents set from the browser may not be reflected in operation. It is recommended that a proxy server not be used unless it is unavoidable.

Handling of the Address for Operation via a Browser

Regarding the actual address that is entered for the address or entered to the URL column when operation of the pro- jector is via a browser, the host name can be used as it is when the host name corresponding to the IP address of the projector has been registered to the domain name server by a network administrator, or the host name corresponding to the IP address of the projector has been set in the “HOSTS” file of the computer being used.

Example 1: When the host name of the projector has been set to “pj.nec.co.jp”, access is gained to the network setting by specifying

http://pj.nec.co.jp/index.html

for the address or the entry column of the URL.

Example 2: When the IP address of the projector is “192.168.73.1”, access is gained to the mail alert settings by specifying

http://192.168.73.1/index.html

for the address or the entry column of the URL.

41

Page 49 Page 51
Image 50
Page 49 Page 51
Contents NP600/NP500/NP400 NP500W Page Safety Cautions Important InformationImportant Information Important SafeguardsInstallation RF Interference for USA onlyFire and Shock Precautions IiiLamp Characteristic Remote Control PrecautionsLamp Replacement If this happens, contact your dealer for lamp replacementImportant Information About High Altitude mode About Copyright of original projected picturesTable of Contents Table of Contents Introduction What’s in the Box?Introduction Features you’ll enjoy Introduction to the Projector Congratulations on Your Purchase of the ProjectorPC Control Port About this user’s manualPreventing unauthorized use of the projector 3W in standby condition with energy saving technologyRear  Part Names of the ProjectorFront/Top This security slot supports the MicroSaver Security SystemIntroduction Top Features Introduction Terminal Panel Features LAN Port RJ-45 →page Part Names of the Remote Control Introduction Battery Installation Operating Range for Wireless Remote ControlSelecting a Location Installation and Connections Setting Up the Screen and the Projector NP600/NP500/NP400Installation and Connections NP500WInstallation and Connections Throw Distance and Screen Size Distance ChartReflecting the Image Enabling the computer’s external display Connecting Your PC or Macintosh Computer Making Connections ↓ Toggle Computer 2ANALOGIBM PC or Compatibles Desktop type or Macintosh Desktop type IBM PC or Compatibles Desktop type or Macintosh Desktop type Installation and Connections Connecting an External Monitor Computer 1 COMPUTER1 Installation and Connections Connecting Your VCR VCRExample of LAN connection Installation and Connections Connecting to a NetworkExample of wired LAN connection Lamp Status Source Remove the lens cap Projecting an Image Basic Operation Turning on the Projector Press the Enter button to execute the selection Projecting an Image Basic OperationTo select a menu language, follow these steps Selecting Default Source Detecting the Signal AutomaticallyUsing the Remote Control  Selecting a Source Adjusting the Picture Size and Position Lift the front edge of the projector Projecting an Image Basic Operation Adjust the Tilt FootAdjusting the left and right tilt of an image Rear foot Focus Use the Zoom lever to adjust the image size on the screenProjecting an Image Basic Operation Zoom Use the Focus ring to obtain the best focusCorrecting Keystone Distortion Adjusting with buttons on the cabinet Correcting Keystone Distortion General screen will be displayed Press the Menu buttonMenu will be displayed Press the Select  button to select KeystonePress the Select  button To turn on Auto KEYSTONE, proceed the following stepsGeneral screen will be highlighted Auto Keystone will be highlightedAdjusting the Image Using Auto Adjust  Optimizing Computer Signal Automatically Turning Up or Down Volume Turning off the Projector To turn off the projector After Use Preparation Make sure that the projector is turned offFreezing a Picture Convenient FeaturesTurning off the Image and Sound  Enlarging a PicturePress the Select  button  Changing Lamp ModeConvenient Features Press the Magnify buttonTo enable the Security function  Preventing the Unauthorized Use of the Projector SecurityTo turn on the projector when Security is enabled Select YES and press the Enter buttonType in your keyword and press the Enter button To disable the Security functionSelect OFF and press the Enter button When operating a computer via the remote mouse receiver  Using the Optional Remote Mouse Receiver NP01MRConnecting the remote mouse receiver to your computer When connecting using the USB terminalAbout Drag Mode Preparation Before Use Network Setting by Using an Http BrowserOverview Handling of the Address for Operation via a BrowserReflect your settings Convenient Features Network SettingsYour network administrator For DhcpConvenient Features Alert Mail Setting Convenient Features Changes are stored until adjusted again Using On-Screen Menu Using the Menus Using On-Screen Menu Menu ElementsList of Menu Items Wxga Mode COMPUTER2 Digital & Analog Menu Descriptions & Functions SourceCOMPUTER1 VideoDetail Settings Menu Descriptions & Functions AdjustPicture Preset Brightness GeneralContrast SharpnessImage Options ResetAdjusting Clock and Phase CLOCK/PHASE Select overscan percentage 0%, 5% and 10% for signal Selecting Overscan Percentage OverscanUsing On-Screen Menu Selecting Aspect Ratio Aspect Ratio Computer signal Video signalLow-pass filter is turned off Correcting Vertical Keystone Distortion Manually Keystone Menu Descriptions & Functions SetupEnabling Auto Keystone Auto Keystone Saving Vertical Keystone Correction Keystone SaveSetting Lamp Mode to Normal or Eco Lamp Mode Setting Closed Caption Closed CaptionMenu Installation Selecting Projector Orientation OrientationThis option turns on or off the Control Panel Lock function Enabling Security SecuritySelecting Communication Speed Communication Speed Assigning or Changing the Control ID TingControl is pressed Release the ID SET buttonOPTIONS1 Setting Auto Adjust Auto AdjustSelecting Fan Mode FAN Mode Enabling Key Sound and Error Sound Beep Using On-Screen Menu Selecting Signal Format Signal SelectEnabling or Disabling Wxga Mode Wxga Mode Default standard settingEnabling Auto Power On Auto Power Onac Using Off Timer OFF TimerSelecting Power-saving in Standby Mode OPTIONS2Enabling Power Management Auto Power OFF Selecting Default Source Default Source SelectUsage Time Lamp lifeH Replacement lampMenu Descriptions & Functions Info 3000 4000Version Wired LANSource Clearing Networking Settings Network Settings Menu Descriptions & Functions ResetReturning to Factory Default Reset Clearing Lamp Hour Meter Clear Lamp HoursTo clean the air-filter Maintenance Cleaning or Replacing the Filters To replace the filter spongeReinstall the new filter cover 2 locations Cleaning the Cabinet and the LensMaintenance Clear the filter hours used Replacing the Lamp To replace the lampRemove the lamp housing Remove the lamp coverInstall a new lamp housing Reattach the lamp coverOver-Temperature Protection  TroubleshootingIndicator Messages AppendixAppendix For more information contact your dealerPage  Specifications Model Number NP600/NP500/NP400/NP500WNP600G/NP500G/NP400G 200-240V AC  Cabinet Dimensions Unit mm inchPin No RGB Signal Analog YCbCr Signal  Pin Assignments of D-Sub Computer Input ConnectorMini D-Sub 15 Pin Connector  Compatible Input Signal List IBMPC Control Codes PC Control Connector D-SUB 9P PC Control Codes and Cable Connection Cable ConnectionVideo and Audio  Troubleshooting Check ListPower OtherComputer Signal cableInstallation environment Video equipmentTravelCare a service for international travelers  TravelCare GuideAsia and Middle East Company & Name with signature Dear Sir sCondition of your TravelCare Service Program 7N951211
Related manuals
Manual 2 pages 53.23 Kb

NP500, NP600G, NP400G, NP500G, NP400 specifications

The NEC NP600, NP500, NP500W, NP300, and NP400 are a series of high-performance projectors designed for a range of professional and educational applications. Each model in this lineup offers unique features and technologies to cater to various user needs, making them popular choices in the projection market.

The NEC NP600 is a state-of-the-art projector that utilizes DLP technology, providing exceptional image quality with vibrant colors and sharp details. With a brightness of 6000 lumens, it is perfect for large spaces where ambient light may impact visibility. The NP600 supports a high XGA resolution, ensuring that even the finest text is displayed clearly. Additionally, this model is equipped with advanced connectivity options, allowing seamless integration with laptops, document cameras, and other multimedia devices.

Moving to the NEC NP500, this model focuses on delivering versatility and portability for users on the go. With a compact design and weighing in at just under 5 kg, it can easily be transported between locations. The NP500 boasts a brightness of 5000 lumens and native XGA resolution, making it suitable for medium-sized meeting rooms. Its rich color reproduction and quick start-up time further enhance its usability, ensuring that presentations can be initiated without delay.

The NP500W is an enhancement of the NP500, offering WXGA resolution to cater to widescreen content. This projector ensures that high-definition presentations are delivered with striking clarity and precision. With a brightness level of 5000 lumens, the NP500W also incorporates advanced lamp technology that ensures extended lamp life—reducing maintenance costs over time.

The NP300 is designed for budget-conscious users without sacrificing quality. This projector provides a brightness of 3000 lumens, making it suitable for small to medium-sized venues. It supports SVGA resolution, and its compact size enhances portability. Its simple setup and user-friendly interface make it an ideal choice for educational environments.

Lastly, the NP400 is an engaging option for corporate use. With a brightness of 4000 lumens, it balances performance and affordability effectively. The NP400 supports XGA resolution and features multiple connectivity options, allowing compatibility with various devices. Its eco-friendly design also contributes to energy conservation, ensuring that it remains a sustainable choice for organizations.

Collectively, the NEC NP series offers impressive performance across varying needs, with advanced technology, flexibility in use, and reliability that ensures successful presentations in any environment. Whether for education, corporate, or professional use, these models provide high-quality projection solutions adaptable to different situations.
Top Page Image Contents