NEC NP600G, NP500WG, NP500G, NP400G user manual

Page 86

7. Appendix

If there is no picture, or the picture is not displayed correctly.

•Power on process for the projector and the PC.

Be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC.

In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up.

NOTE: You can check the horizontal frequency of the current signal in the projector’s menu under Information. If it reads “0kHz”, this means there is no signal being output from the computer. (→ page 68 or go to next step)

•Enabling the computer’s external display.

Displaying an image on the notebook PC’s screen does not necessarily mean it outputs a signal to the projector. When using a PC compatible laptop, a combination of function keys will enable/disable the external display. Usu- ally, the combination of the ‘Fn” key along with one of the 12 function keys gets the external display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through external display selections.

•Non-standard signal output from the computer

If the output signal from a notebook PC is not an industry standard, the projected image may not be displayed correctly. Should this happen, deactivate the notebook PC’s LCD screen when the projector display is in use. Each notebook PC has a different way of deactivate/reactivate the local LCD screens as described in the previous step. Refer to your computer’s documentation for detailed information.

•Image displayed is incorrect when using a Macintosh

When using a Macintosh with the projector, set the DIPswitch of the Mac adapter (not supplied with the projector) according to your resolution. After setting, restart your Macintosh for the changes to take affect.

For setting display modes other than those supported by your Macintosh and the projector, changing the DIP switch on a Mac adapter may bounce an image slightly or may display nothing. Should this happen, set the DIP switch to the 13” fixed mode and then restart your Macintosh. After that, restore the DIP switches to a displayable mode and then restart the Macintosh again.

NOTE: A Video Adapter cable manufactured by Apple Computer is needed for a PowerBook which does not have a mini D-Sub 15-pin connector.

•Mirroring on a PowerBook

*When using the projector with a Macintosh PowerBook, output may not be set to 1024 x 768 unless “mirroring” is off on your PowerBook. Refer to owner’s manual supplied with your Macintosh computer for mirroring.

•Folders or icons are hidden on the Macintosh screen

Folders or icons may not be seen on the screen. Should this happen, select [View] → [Arrange] from the Apple menu and arrange icons.

77

Page 85 Page 87
Image 86
Page 85 Page 87
Contents NP600/NP500/NP400 NP500W Page Safety Cautions Important InformationImportant Information Important SafeguardsInstallation RF Interference for USA onlyFire and Shock Precautions IiiLamp Characteristic Remote Control PrecautionsLamp Replacement If this happens, contact your dealer for lamp replacementImportant Information About High Altitude mode About Copyright of original projected picturesTable of Contents Table of Contents Introduction What’s in the Box?Introduction Features you’ll enjoy Introduction to the Projector Congratulations on Your Purchase of the ProjectorPC Control Port About this user’s manualPreventing unauthorized use of the projector 3W in standby condition with energy saving technologyRear  Part Names of the ProjectorFront/Top This security slot supports the MicroSaver Security SystemIntroduction Top Features Introduction Terminal Panel Features LAN Port RJ-45 →page Part Names of the Remote Control Introduction Battery Installation Operating Range for Wireless Remote ControlSelecting a Location Installation and Connections Setting Up the Screen and the Projector NP600/NP500/NP400Installation and Connections NP500WInstallation and Connections Throw Distance and Screen Size Distance ChartReflecting the Image Enabling the computer’s external display Connecting Your PC or Macintosh Computer Making Connections ↓ Toggle Computer 2ANALOGIBM PC or Compatibles Desktop type or Macintosh Desktop type IBM PC or Compatibles Desktop type or Macintosh Desktop type Installation and Connections Connecting an External Monitor Computer 1 COMPUTER1 Installation and Connections Connecting Your VCR VCRExample of LAN connection Installation and Connections Connecting to a NetworkExample of wired LAN connection Lamp Status Source Remove the lens cap Projecting an Image Basic Operation Turning on the Projector Press the Enter button to execute the selection Projecting an Image Basic OperationTo select a menu language, follow these steps Selecting Default Source Detecting the Signal AutomaticallyUsing the Remote Control  Selecting a Source Adjusting the Picture Size and Position Lift the front edge of the projector Projecting an Image Basic Operation Adjust the Tilt FootAdjusting the left and right tilt of an image Rear foot Focus Use the Zoom lever to adjust the image size on the screenProjecting an Image Basic Operation Zoom Use the Focus ring to obtain the best focusCorrecting Keystone Distortion Adjusting with buttons on the cabinet Correcting Keystone Distortion General screen will be displayed Press the Menu buttonMenu will be displayed Press the Select  button to select KeystonePress the Select  button To turn on Auto KEYSTONE, proceed the following stepsGeneral screen will be highlighted Auto Keystone will be highlightedAdjusting the Image Using Auto Adjust  Optimizing Computer Signal Automatically Turning Up or Down Volume Turning off the Projector To turn off the projector After Use Preparation Make sure that the projector is turned offFreezing a Picture Convenient FeaturesTurning off the Image and Sound  Enlarging a PicturePress the Select  button  Changing Lamp ModeConvenient Features Press the Magnify buttonTo enable the Security function  Preventing the Unauthorized Use of the Projector SecurityTo turn on the projector when Security is enabled Select YES and press the Enter buttonType in your keyword and press the Enter button To disable the Security functionSelect OFF and press the Enter button When operating a computer via the remote mouse receiver  Using the Optional Remote Mouse Receiver NP01MRConnecting the remote mouse receiver to your computer When connecting using the USB terminalAbout Drag Mode Preparation Before Use Network Setting by Using an Http BrowserOverview Handling of the Address for Operation via a BrowserReflect your settings Convenient Features Network SettingsYour network administrator For DhcpConvenient Features Alert Mail Setting Convenient Features Changes are stored until adjusted again Using On-Screen Menu Using the Menus Using On-Screen Menu Menu ElementsList of Menu Items Wxga Mode COMPUTER2 Digital & Analog Menu Descriptions & Functions SourceCOMPUTER1 VideoDetail Settings Menu Descriptions & Functions AdjustPicture Preset Brightness GeneralContrast SharpnessImage Options ResetAdjusting Clock and Phase CLOCK/PHASE Select overscan percentage 0%, 5% and 10% for signal Selecting Overscan Percentage OverscanUsing On-Screen Menu Selecting Aspect Ratio Aspect Ratio Computer signal Video signalLow-pass filter is turned off Correcting Vertical Keystone Distortion Manually Keystone Menu Descriptions & Functions SetupEnabling Auto Keystone Auto Keystone Saving Vertical Keystone Correction Keystone SaveSetting Lamp Mode to Normal or Eco Lamp Mode Setting Closed Caption Closed CaptionMenu Installation Selecting Projector Orientation OrientationThis option turns on or off the Control Panel Lock function Enabling Security SecuritySelecting Communication Speed Communication Speed Assigning or Changing the Control ID TingControl is pressed Release the ID SET buttonOPTIONS1 Setting Auto Adjust Auto AdjustSelecting Fan Mode FAN Mode Enabling Key Sound and Error Sound Beep Using On-Screen Menu Selecting Signal Format Signal SelectEnabling or Disabling Wxga Mode Wxga Mode Default standard settingEnabling Auto Power On Auto Power Onac Using Off Timer OFF TimerSelecting Power-saving in Standby Mode OPTIONS2Enabling Power Management Auto Power OFF Selecting Default Source Default Source SelectUsage Time Lamp lifeH Replacement lampMenu Descriptions & Functions Info 3000 4000Version Wired LANSource Clearing Networking Settings Network Settings Menu Descriptions & Functions ResetReturning to Factory Default Reset Clearing Lamp Hour Meter Clear Lamp HoursTo clean the air-filter Maintenance Cleaning or Replacing the Filters To replace the filter spongeReinstall the new filter cover 2 locations Cleaning the Cabinet and the LensMaintenance Clear the filter hours used Replacing the Lamp To replace the lampRemove the lamp housing Remove the lamp coverInstall a new lamp housing Reattach the lamp coverOver-Temperature Protection  TroubleshootingIndicator Messages AppendixAppendix For more information contact your dealerPage  Specifications Model Number NP600/NP500/NP400/NP500WNP600G/NP500G/NP400G 200-240V AC  Cabinet Dimensions Unit mm inchPin No RGB Signal Analog YCbCr Signal  Pin Assignments of D-Sub Computer Input ConnectorMini D-Sub 15 Pin Connector  Compatible Input Signal List IBMPC Control Codes PC Control Connector D-SUB 9P PC Control Codes and Cable Connection Cable ConnectionVideo and Audio  Troubleshooting Check ListPower OtherComputer Signal cableInstallation environment Video equipmentTravelCare a service for international travelers  TravelCare GuideAsia and Middle East Company & Name with signature Dear Sir sCondition of your TravelCare Service Program 7N951211
Related manuals
Manual 2 pages 53.23 Kb

NP500, NP600G, NP400G, NP500G, NP400 specifications

The NEC NP600, NP500, NP500W, NP300, and NP400 are a series of high-performance projectors designed for a range of professional and educational applications. Each model in this lineup offers unique features and technologies to cater to various user needs, making them popular choices in the projection market.

The NEC NP600 is a state-of-the-art projector that utilizes DLP technology, providing exceptional image quality with vibrant colors and sharp details. With a brightness of 6000 lumens, it is perfect for large spaces where ambient light may impact visibility. The NP600 supports a high XGA resolution, ensuring that even the finest text is displayed clearly. Additionally, this model is equipped with advanced connectivity options, allowing seamless integration with laptops, document cameras, and other multimedia devices.

Moving to the NEC NP500, this model focuses on delivering versatility and portability for users on the go. With a compact design and weighing in at just under 5 kg, it can easily be transported between locations. The NP500 boasts a brightness of 5000 lumens and native XGA resolution, making it suitable for medium-sized meeting rooms. Its rich color reproduction and quick start-up time further enhance its usability, ensuring that presentations can be initiated without delay.

The NP500W is an enhancement of the NP500, offering WXGA resolution to cater to widescreen content. This projector ensures that high-definition presentations are delivered with striking clarity and precision. With a brightness level of 5000 lumens, the NP500W also incorporates advanced lamp technology that ensures extended lamp life—reducing maintenance costs over time.

The NP300 is designed for budget-conscious users without sacrificing quality. This projector provides a brightness of 3000 lumens, making it suitable for small to medium-sized venues. It supports SVGA resolution, and its compact size enhances portability. Its simple setup and user-friendly interface make it an ideal choice for educational environments.

Lastly, the NP400 is an engaging option for corporate use. With a brightness of 4000 lumens, it balances performance and affordability effectively. The NP400 supports XGA resolution and features multiple connectivity options, allowing compatibility with various devices. Its eco-friendly design also contributes to energy conservation, ensuring that it remains a sustainable choice for organizations.

Collectively, the NEC NP series offers impressive performance across varying needs, with advanced technology, flexibility in use, and reliability that ensures successful presentations in any environment. Whether for education, corporate, or professional use, these models provide high-quality projection solutions adaptable to different situations.
Top Page Image Contents