NEC NP500G Using On-Screen Menu,  Using the Menus, Changes are stored until adjusted again

Page 54

5. Using On-Screen Menu

Using the Menus

NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected.

1. Press the MENU button on the remote control or the projector cabinet to display the menu.

NOTE: The commands such as ENTER, EXIT, ,  in the bottom show available buttons for your operation.

2.Press the SELECT  buttons on the remote control or the projector cabinet to display the submenu.

3.Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the first tab.

4.Use the SELECT  buttons on the remote control or the projector cabinet to select the item you want to adjust or set.

You can use the SELECT  buttons on the remote control or the projector cabinet to select the tab you want.

5.Press the ENTER button on the remote control or the projector cabinet to display the submenu window.

6.Adjust the level or turn the selected item on or off by using the SELECT  buttons on the remote control or the projector cabinet.

Changes are stored until adjusted again.

7.Repeat steps 2 -6 to adjust an additional item, or press the EXIT button on the remote control or the projec- tor cabinet to quit the menu display.

NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings.

8.Press the MENU button to close the menu.

To return to the previous menu, press the EXIT button.

45

Page 53 Page 55
Image 54
Page 53 Page 55
Contents NP600/NP500/NP400 NP500W Page Safety Cautions Important InformationImportant Information Important SafeguardsInstallation RF Interference for USA onlyFire and Shock Precautions IiiLamp Characteristic Remote Control PrecautionsLamp Replacement If this happens, contact your dealer for lamp replacementImportant Information About High Altitude mode About Copyright of original projected picturesTable of Contents Table of Contents Introduction What’s in the Box?Introduction Features you’ll enjoy Introduction to the Projector Congratulations on Your Purchase of the ProjectorPC Control Port About this user’s manualPreventing unauthorized use of the projector 3W in standby condition with energy saving technologyRear  Part Names of the ProjectorFront/Top This security slot supports the MicroSaver Security SystemIntroduction Top Features Introduction Terminal Panel Features LAN Port RJ-45 →page Part Names of the Remote Control Introduction Battery Installation Operating Range for Wireless Remote ControlSelecting a Location Installation and Connections Setting Up the Screen and the Projector NP600/NP500/NP400Installation and Connections NP500WInstallation and Connections Throw Distance and Screen Size Distance ChartReflecting the Image Connecting Your PC or Macintosh Computer  Making ConnectionsEnabling the computer’s external display ↓ Toggle Computer 2ANALOGIBM PC or Compatibles Desktop type or Macintosh Desktop type IBM PC or Compatibles Desktop type or Macintosh Desktop type Installation and Connections Connecting an External Monitor Computer 1 COMPUTER1 Installation and Connections Connecting Your VCR VCRInstallation and Connections Connecting to a Network Example of wired LAN connectionExample of LAN connection Lamp Status Source Projecting an Image Basic Operation  Turning on the ProjectorRemove the lens cap Projecting an Image Basic Operation To select a menu language, follow these stepsPress the Enter button to execute the selection Selecting Default Source Detecting the Signal AutomaticallyUsing the Remote Control  Selecting a Source Adjusting the Picture Size and Position Projecting an Image Basic Operation Adjust the Tilt Foot Adjusting the left and right tilt of an image Rear footLift the front edge of the projector Focus Use the Zoom lever to adjust the image size on the screenProjecting an Image Basic Operation Zoom Use the Focus ring to obtain the best focusAdjusting with buttons on the cabinet  Correcting Keystone DistortionCorrecting Keystone Distortion General screen will be displayed Press the Menu buttonMenu will be displayed Press the Select  button to select KeystonePress the Select  button To turn on Auto KEYSTONE, proceed the following stepsGeneral screen will be highlighted Auto Keystone will be highlighted Optimizing Computer Signal Automatically  Turning Up or Down VolumeAdjusting the Image Using Auto Adjust Turning off the Projector To turn off the projector After Use Preparation Make sure that the projector is turned offFreezing a Picture Convenient FeaturesTurning off the Image and Sound  Enlarging a PicturePress the Select  button  Changing Lamp ModeConvenient Features Press the Magnify buttonTo enable the Security function  Preventing the Unauthorized Use of the Projector SecurityTo turn on the projector when Security is enabled Select YES and press the Enter buttonTo disable the Security function Select OFF and press the Enter buttonType in your keyword and press the Enter button When operating a computer via the remote mouse receiver  Using the Optional Remote Mouse Receiver NP01MRConnecting the remote mouse receiver to your computer When connecting using the USB terminalAbout Drag Mode Preparation Before Use Network Setting by Using an Http BrowserOverview Handling of the Address for Operation via a BrowserReflect your settings Convenient Features Network SettingsYour network administrator For DhcpConvenient Features Alert Mail Setting Convenient Features Using On-Screen Menu  Using the MenusChanges are stored until adjusted again Using On-Screen Menu Menu ElementsList of Menu Items Wxga Mode COMPUTER2 Digital & Analog Menu Descriptions & Functions SourceCOMPUTER1 VideoMenu Descriptions & Functions Adjust Picture PresetDetail Settings Brightness GeneralContrast SharpnessReset Adjusting Clock and Phase CLOCK/PHASEImage Options Select overscan percentage 0%, 5% and 10% for signal Selecting Overscan Percentage OverscanUsing On-Screen Menu Selecting Aspect Ratio Aspect Ratio Computer signal Video signalLow-pass filter is turned off Correcting Vertical Keystone Distortion Manually Keystone Menu Descriptions & Functions SetupEnabling Auto Keystone Auto Keystone Saving Vertical Keystone Correction Keystone SaveSetting Lamp Mode to Normal or Eco Lamp Mode Setting Closed Caption Closed CaptionMenu Installation Selecting Projector Orientation OrientationEnabling Security Security Selecting Communication Speed Communication SpeedThis option turns on or off the Control Panel Lock function Assigning or Changing the Control ID TingControl is pressed Release the ID SET buttonSetting Auto Adjust Auto Adjust Selecting Fan Mode FAN ModeOPTIONS1 Enabling Key Sound and Error Sound Beep Using On-Screen Menu Selecting Signal Format Signal SelectEnabling or Disabling Wxga Mode Wxga Mode Default standard settingEnabling Auto Power On Auto Power Onac Using Off Timer OFF TimerSelecting Power-saving in Standby Mode OPTIONS2Enabling Power Management Auto Power OFF Selecting Default Source Default Source SelectUsage Time Lamp lifeH Replacement lampMenu Descriptions & Functions Info 3000 4000Wired LAN SourceVersion Clearing Networking Settings Network Settings Menu Descriptions & Functions ResetReturning to Factory Default Reset Clearing Lamp Hour Meter Clear Lamp HoursTo clean the air-filter Maintenance Cleaning or Replacing the Filters To replace the filter spongeReinstall the new filter cover 2 locations Cleaning the Cabinet and the LensMaintenance Clear the filter hours used Replacing the Lamp To replace the lampRemove the lamp housing Remove the lamp coverInstall a new lamp housing Reattach the lamp coverOver-Temperature Protection  TroubleshootingIndicator Messages AppendixAppendix For more information contact your dealerPage  Specifications Model Number NP600/NP500/NP400/NP500WNP600G/NP500G/NP400G 200-240V AC  Cabinet Dimensions Unit mm inch Pin Assignments of D-Sub Computer Input Connector Mini D-Sub 15 Pin ConnectorPin No RGB Signal Analog YCbCr Signal  Compatible Input Signal List IBMPC Control Codes PC Control Connector D-SUB 9P PC Control Codes and Cable Connection Cable ConnectionVideo and Audio  Troubleshooting Check ListPower OtherComputer Signal cableInstallation environment Video equipmentTravelCare a service for international travelers  TravelCare GuideAsia and Middle East Company & Name with signature Dear Sir sCondition of your TravelCare Service Program 7N951211
Related manuals
Manual 2 pages 53.23 Kb

NP500, NP600G, NP400G, NP500G, NP400 specifications

The NEC NP600, NP500, NP500W, NP300, and NP400 are a series of high-performance projectors designed for a range of professional and educational applications. Each model in this lineup offers unique features and technologies to cater to various user needs, making them popular choices in the projection market.

The NEC NP600 is a state-of-the-art projector that utilizes DLP technology, providing exceptional image quality with vibrant colors and sharp details. With a brightness of 6000 lumens, it is perfect for large spaces where ambient light may impact visibility. The NP600 supports a high XGA resolution, ensuring that even the finest text is displayed clearly. Additionally, this model is equipped with advanced connectivity options, allowing seamless integration with laptops, document cameras, and other multimedia devices.

Moving to the NEC NP500, this model focuses on delivering versatility and portability for users on the go. With a compact design and weighing in at just under 5 kg, it can easily be transported between locations. The NP500 boasts a brightness of 5000 lumens and native XGA resolution, making it suitable for medium-sized meeting rooms. Its rich color reproduction and quick start-up time further enhance its usability, ensuring that presentations can be initiated without delay.

The NP500W is an enhancement of the NP500, offering WXGA resolution to cater to widescreen content. This projector ensures that high-definition presentations are delivered with striking clarity and precision. With a brightness level of 5000 lumens, the NP500W also incorporates advanced lamp technology that ensures extended lamp life—reducing maintenance costs over time.

The NP300 is designed for budget-conscious users without sacrificing quality. This projector provides a brightness of 3000 lumens, making it suitable for small to medium-sized venues. It supports SVGA resolution, and its compact size enhances portability. Its simple setup and user-friendly interface make it an ideal choice for educational environments.

Lastly, the NP400 is an engaging option for corporate use. With a brightness of 4000 lumens, it balances performance and affordability effectively. The NP400 supports XGA resolution and features multiple connectivity options, allowing compatibility with various devices. Its eco-friendly design also contributes to energy conservation, ensuring that it remains a sustainable choice for organizations.

Collectively, the NEC NP series offers impressive performance across varying needs, with advanced technology, flexibility in use, and reliability that ensures successful presentations in any environment. Whether for education, corporate, or professional use, these models provide high-quality projection solutions adaptable to different situations.
Top Page Image Contents