NEC LT155, LT154 user manual Connecting Your DVD Player, DVD player, White Red

Connecting Your DVD Player

DVD player

	Cr
	Cb
AUDIO	Y
	Cr
L
R	Cb
	Y
	White
	Red

L

E

CCARD

		USB
AC IN		PC	CO	NTROL V
				IDEO	S-V
					IDEO	RGB
	DEO				RGB
		S-					INPUT
		VIDEO

RGB

AUDIO

Optional 15-pin-to-RCA 3 cable (optional) (Component V )

AUDIO

L

R

White

Red

You can connect your projector to a DVD player with component out- puts or Video output. To do so, simply:

1.Turn off the power to your projector and DVD player.

2.If your DVD player has the component video (Y,Cb,Cr) output, use

the optional 15-pin-to-RCA 3 cable to connect your DVD player to the RGB INPUT connector on the projector.

For a DVD player without component video (Y,Cb,Cr) outputs, use common RCA cables (not provided) to connect a composite VIDEO output of the DVD player to the Video Input of the projector.

3. Turn on the projector and DVD player.

NOTE: Refer to your DVD player’s owner’s manual for more information about your DVD player’s video output requirements,

Audio cable (not supplied) Audio Equipment

E – 21