NEC LT155, LT154 Basic Operation, Selecting the computer or video source, Source display

Basic Operation

Selecting the computer or video source:

SOURCE

AUTO

ADJUST

Each time the Source button is pressed, the input source will change as follows:

→RGB → Video → S-Video → PC Card Viewer 

If no input signal is present, the input will be skipped.

VIDEO	S-VIDEO	AUTO ADJ.
RGB 1	RGB 2	PJ

HELP POINTER PC CARD

Source display

Optimizing RGB image automatically

Press the Auto Adjust button to optimize an RGB image automatically.

OFF ON

SOURCE

VIDEO	S-VIDEO	AUTO ADJ.
RGB 1	RGB 2	PJ

AUTO

ADJUST

MENULASER

Press the Auto Adjust button to fine-tune the computer image or to remove any vertical banding that might appear and to reduce video noise, dot interference or cross talk (this is evident when part of your image appears to be shimmering). This function adjusts the clock fre- quencies that eliminate the horizontal banding in the image. This func- tion also adjusts the clock phase to reduce video noise, dot interfer- ence or cross talk. (This is evident when part of your image appears to be shimmering.)

This adjustment may be necessary when you connect your computer for the first time.

NOTE: The Auto Adjust function does not work for component signal.

E – 27