NEC 5800/320Fd manual Position the Pallet Ramp

Page 20

Figure 12. Position the Pallet Ramp

msys105

2.With the help of another person, slowly and carefully roll the cabinet down the ramp, with one person on each side of the cabinet, not in the front or back. See Figure 13. Each person must hold the upper portion of the cabinet with both hands.

!W A R N I N G

The cabinet is top heavy. Use extreme caution when rolling it down the ramp.

-16-

Image 20
Contents Read Me First Unpacking Express5800/320Fd System Cabinets NEC Corporation of AmericaPage Contents Page Introduction Packaged CabinetCabinet Packaged for Shipping Tie-down Ramp Shows the dimensions of a packaged 38U cabinet Before Unpacking the CabinetDimensions of a Packaged 38U Cabinet Dimensions of a Packaged 24U Cabinet 56.5 Moving the Cabinet to the Installation Site Unpacking and Checking the Cabinet To unpack the cabinetTools Needed to Unpack the Cabinet Removing the Packing MaterialsCutting the Exterior Shipping Straps Remove the plastic wrap encasing the cabinet Removing the Interior Shipping Straps Wooden-Restraint Blocks Inserting the Lever Bar Tilting the Cabinet Removing the Cabinet from the Pallet Sliding Back the Wooden Restraint BlocksPosition the Pallet Ramp Checking the Cabinet and Systems Moving the Cabinet Down the Pallet RampVerifying the Express5800/320Fd Serial Number Stabilizing the Systems Stabilization GuidelinesSystem Documentation Disposing of Shipping MaterialsWhat Happens Next? Getting Help Online support from NEC Technical Support. You