Epson (USB 2.0) user manual NetWare Wizard

Page 18

2 Select “Obtain an IP address from DHCP server”. If there is a DHCP server on your network. This option allows the print server to obtain IP-related settings automatically from your DHCP server. This setting, by default, is disabled. If you would like to manually specify an IP address to the device, please skip to the following step.

3 In the IP Address option, type an IP address for the print server. The IP address must meet the IP addressing requirements of the network segment.

4 (Optional) In the Subnet Mask option, type the Subnet Mask your LAN or network segment is currently configured to use.

5 (Optional) In the Gateway field, type the IP address of gateway.

6 When done, click OK button. The program will save the above settings into the print server.

7 Done

NetWare Wizard

1.Log into your NetWare file server as a Supervisor (Admin.) or equivalent.

2.Click Wizard button just like a picture .and select NetWare Wizard, as follow picture.

Image 18
Contents Port Print Server USB Table of Contents TCP/IP LPR Port Printing Installation Trademarks CopyrightIntroduction Components and FeaturesLED Indicators State IndicationBefore you start, you should prepare the following items Print Server Installation Network EnvironmentInternet Printing Protocol HP Web JetAdminEmbedded Web server CommentSoftware Installation Installing the PSAdmin and Print Server’s DriverPage Page Page Page Page Page Using PSAdmin Wizard TCP/IP WizardNetWare Wizard Manual Setup Properties -TCP/IP Options Obtain an IP address from a Dhcp serverSpecify an IP address Upgrade ResetRefresh Multiple Print Queues Configuration Uninstalling the PSAdmin on Windows PCProcedure Internet Printer Connection and HP Web JetAdmin Windows NT/2000/XP/2003IPP Overview Page Confirming Installation and Supply Access HP Web JetAdmin OverviewSystem Requirements Installing HP Web JetAdmin Configuring and Modifying a DeviceOverview Configuration from Embedded Web ServerUsing Embedded Web Server Status MenuPage Printer Status TCP/IP StatusNetware Status General Settings NetWare NDS SettingNetWare Bindery Setting AppleTalk Status Snmp StatusPage Setup Menu System SetupPrinter Setup Re-type PasswordTCP/IP Setup NetWare SetupPage Installing Print Server on NetWare 4.x/5.x Installation ProcedureAppleTalk Setup Setting Up a Macintosh Computer Snmp SetupActivities/SNMP Trap Messages / Description MIB Object Names / DescriptionSMB Setup Page Preparation TCP/IP Protocol InstallationNetwork Print Monitor NetBEUIIPX/SPX-compatible Protocol Installation NetBEUI Protocol InstallationPage Page Assigning an IP Address TCP/IP LPR Port Printing InstallationBasic TCP/IP Installation Overview Use the Network Print Monitor utilityPage Page Page Unix Installation SCO Unix 8.0.0 Caldera Open UnixSystem V Release 4 Unix Redhat LinuxPage Page Upgrading the print server from PSAdmin Upgrading Print ServerUpgrading the print server from Unix Through TCP/IP Upgrading the print server from Browser Troubleshooting Print Port Related Problems Windows 95/98/Me/NT/2000/XP/2003 TroubleshootingMulti-Segment Frame Type 802.2 Installation Print Server Reconfiguration Procedure on Windows 95/98/Me Print server Reconfiguration Procedure on Windows NTMoving the print server to a New Segment Novell NetWare Troubleshooting TCP/IP TroubleshootingMoving Your Computer to a New Segment If the gateway computer is a NT/UNIX server If the gateway computer is a Novell NetWare file serverPage Appendix SMB Printing with Windows XPPage Page Reset Button Reboot the Print serverFrequently Asked Questions Question aQuestion B Question F Question DQuestion E Question GAdditional Installation Instructions