IPX/SPX-compatible Protocol Installation
1.Click Start, point to Settings, and select Control Panel.
2.Double click the Network icon.
3.If the
4.Select Protocol and click Add.
5.Select Microsoft from the Manufacturers list.
6.Select
7.Restart the computer.
8.Done.
NetBEUI Protocol Installation
1.Click Start, point to Settings, and select Control Panel.
2.Double click the Network icon.
3.If the NetBEUI is not already installed, click Add.
4.Select Protocol and click Add.
5.Select Microsoft from the Manufacturers list.
6.Select NetBEUI from the Network Protocols box and follow the instructions on the screen.
7.Restart your computer for new settings to take effect.
8.Done.
Note: For more detailed information, please refer to your Microsoft Windows 9X/ME/NT/2000/XP/2003 manuals.
Windows 95/98/Me/NT/2000/XP/2003 manual Installation Procedure
Please perform the steps as follows to ensure a smooth installation:
1.Run Setup from the print server’s NetWare, Win 95/98/Me/NT/2000/XP/2003 Setup diskette
2.The Network Print Monitor for Windows 95/98/Me Setup will then appear. Click Next.
3.A message reading, “Setup is complete. You may add the Network Print Port by using the PSAdmin” will appear. Click OK.
4.Click Start, point to Settings, and select Printers.
5.
6.Select Local Printer and click Next.
7.Select the appropriate printer manufacturer and printer type and click Next.
8.Select LPT1 and click Next.
9.Type in the Printer Name and click Next.