Epson (USB 2.0) user manual SMB Setup

Page 41

SNMP Community: The print server supports up to two community names. The default community name is public (case-sensitive), with Read Only access right in default.

Support HP WebJetAdmin: This option allows user determine to disable/enable the Support HP WebJetAdmin.

SNMP Traps: Enable the function of sending SNMP Authentication Failure trap message to the network administrator, if the community name within a SNMP request is not correct.

SMB Setup

The print server supports the SMB (Server Message Block) protocol, user can send the print jobs through Network Neighborhood without installing print server’s driver.

1.Click Setup, it appears the sub-menu.

2.Click SMB, it as shown in the following picture.

Image 41

Contents Port Print Server USB Table of Contents TCP/IP LPR Port Printing Installation Copyright TrademarksLED Indicators Components and FeaturesIntroduction State IndicationBefore you start, you should prepare the following items Network Environment Print Server InstallationEmbedded Web server HP Web JetAdminInternet Printing Protocol CommentInstalling the PSAdmin and Print Server’s Driver Software InstallationPage Page Page Page Page Page Using PSAdmin TCP/IP Wizard WizardNetWare Wizard Manual Setup Specify an IP address Properties -TCP/IP OptionsObtain an IP address from a Dhcp server Refresh UpgradeReset Procedure Multiple Print Queues ConfigurationUninstalling the PSAdmin on Windows PC IPP Overview Internet Printer Connection and HP Web JetAdminWindows NT/2000/XP/2003 Page System Requirements Installing HP Web JetAdmin HP Web JetAdmin OverviewConfirming Installation and Supply Access Configuring and Modifying a DeviceUsing Embedded Web Server Configuration from Embedded Web ServerOverview Status MenuPage TCP/IP Status Printer StatusNetware Status NetWare Bindery Setting General SettingsNetWare NDS Setting Snmp Status AppleTalk StatusPage System Setup Setup MenuRe-type Password Printer SetupNetWare Setup TCP/IP SetupPage Installation Procedure Installing Print Server on NetWare 4.x/5.xAppleTalk Setup Snmp Setup Setting Up a Macintosh ComputerMIB Object Names / Description Activities/SNMP Trap Messages / DescriptionSMB Setup Page Network Print Monitor TCP/IP Protocol InstallationPreparation NetBEUINetBEUI Protocol Installation IPX/SPX-compatible Protocol InstallationPage Page Basic TCP/IP Installation Overview TCP/IP LPR Port Printing InstallationAssigning an IP Address Use the Network Print Monitor utilityPage Page Page SCO Unix 8.0.0 Caldera Open Unix Unix InstallationRedhat Linux System V Release 4 UnixPage Page Upgrading the print server from Unix Through TCP/IP Upgrading the print server from PSAdminUpgrading Print Server Upgrading the print server from Browser Troubleshooting Multi-Segment Frame Type 802.2 Installation Print Port Related ProblemsWindows 95/98/Me/NT/2000/XP/2003 Troubleshooting Moving the print server to a New Segment Print Server Reconfiguration Procedure on Windows 95/98/MePrint server Reconfiguration Procedure on Windows NT Moving Your Computer to a New Segment Novell NetWare TroubleshootingTCP/IP Troubleshooting If the gateway computer is a Novell NetWare file server If the gateway computer is a NT/UNIX serverPage SMB Printing with Windows XP AppendixPage Page Reboot the Print server Reset ButtonQuestion B Frequently Asked QuestionsQuestion a Question E Question DQuestion F Question GAdditional Installation Instructions