7. Now, you can find your printer’s icon and you can use the SMB printing mode.
Reset Button
Reboot the Print server:
1.Verify the power of print server is turned on.
2.Press the reset button once, and then release it.
WARNING: This will restart the print server and stop all
1.Disconnect the external power adapter.
2.Hold down the reset button.
3.Reconnect the external reset button. Wait about 5~6 seconds.
4.Release the reset button.
5.The print server will restart.
WARNING: This will erase all settings of print server to default and should be performed with caution!
After performing a factory default, the default settings will be:
DHCP client: off
IP address: 192.168.0.10
Subnet Mask: 255.255.255.0