Turning Off the Projector
1.Turn off any equipment connected to the projector.
2.Press the P power button on the projector twice or press the Standby button on the remote control and wait for the light to stop flashing.
Caution: Turn off this product when not in use to prolong the life of the projector.
Selecting the Image Source
The source buttons on the projector and remote control let you switch between images from different pieces of equipment connected to the projector (such as a
Press the Source button on the remote control that corresponds to the port to which your video source is connected.
If you press the 
Source button on the projector, you see a list of available sources. Press
the 
Source button to move through the list and select the desired source.