■Inverse 3D Glasses
Signal > 3D Setup > Inverse 3D Glasses
Reverses the timing for the left and right shutters on the 3D active shutter glasses. Only enable this function if using the rear projection mode or if 3D images are not displaying correctly.
■3D Viewing Notice
Signal > 3D Setup > 3D Viewing Notice
Enables or disables the viewing notice that is displayed when 3D mode is activated.
Adjustments for Computer Images
In addition to the settings described previously, you can adjust the Tracking and Sync settings for analog RGB computer images. Normally, these settings are adjusted automatically by the projector. If you notice that the image is blurry or contains dark vertical bands, you may need to adjust the settings yourself.
■Auto Setup
Signal > Auto Setup
Leave this setting on so that the projector automatically adjusts the tracking, sync, and position of the image.
■Tracking
Signal > Tracking
Adjust the tracking to eliminate vertical bands. It is easiest to adjust the tracking when the image contains a lot of fine detail (such as black text on a white background).
■Sync.
Signal > Sync.
Adjust the synchronization to eliminate blurriness. For best results, make sure the tracking is properly adjusted first.
50 Making Detailed Adjustments