Epson EMP-30 manual Turning On the Projector, Ibm

Page 10

Turning On the Projector

Connecting the Power Cable

Turning On the Power and Projecting Images

If only one signal source has been connected, the signals from that source will be projected without needing to press one of the buttons from the previous table.

If the "No-Signal." message does not disappear, check the connections again.

If a laptop computer or a computer with an LCD screen has been connected to the projector, the images may not be projected straight away. After making the connections, check that the computer has been set up to output signals externally. The following table shows examples of how to toggle output settings. For details, refer to the section of the documentation provided with your computer under a heading such as "External output", "Connecting an external monitor" or similar.

NEC

Panasonic

Toshiba

IBM

Sony

Fujitsu

Macintosh

 

 

 

 

 

 

 

 

 

 

 

 

 

After startup, change the

[Fn]+[F3]

[Fn]+[F3]

[Fn]+[F5]

[Fn]+[F7]

[Fn]+[F7]

[Fn]+[F10]

Control Panel adjustments

 

 

 

 

 

 

so that Mirroring is active

 

 

 

 

 

 

 

If the same still picture is projected for a long period of time, the projected image may become burned in on the computer screen. You should avoid leaving the same image displayed for long periods.

8

Image 10
Contents Page General information About the Manuals and Notations UsedMeaning of unit and projector Contents Features of the Projector Epson cinema filter functionPage Page Adjusting the Image Quality Turning Off the Projector Adjusting the Screen ImageTurning On the Projector Connecting the Power Cable Turning On the ProjectorTurning On the Power and Projecting Images Basic OperationsTurning On the Projector IBMTurning Off the Projector Attach the lens cover Retract the front adjustable feet if they are extendedTurning Off the Projector Focusing the Screen Image Adjusting the Screen ImageAdjusting the Image Size Turn the focus ring to adjust the image focusAdjusting the Screen Image Adjusting the Image AngleSeen from the side Seen from above Correcting Keystone Distortion Approx º above Approx º belowAttach the accessory Epson cinema Adjusting the Image QualityUsing the Epson Cinema Filter Quality of the screen images can be adjusted as followsOperations Selecting the Colour ModeBasic Automatic Setup Adjusting Computer ImagesAdjusting the Image Quality Adjusting the Tracking Press the and buttons to set the tracking valueAdjusting the Sync Press the and buttons to set the sync valueUsing the Configuration Menu Functions Useful Functions When a Computer is ConnectedVideo Menu Using the Configuration Menu FunctionsVideo Menu Sub-menu Function Default Video S-Video, Composite video, ComponentSettings and Useful Functions Sub-menu Function DefaultUsing the Configuration Menu Functions Computer Analogue-RGB/RGB videoAudio Menu Setting MenuSignal is being input BlueUsing the Configuration Menu Functions Sub-menu Default Advanced MenuLanguage setting to their default settings Settings and UsefulImages are horizontally and vertically reversed Reset About MenuReset All Menu Confirm the selection Using the Configuration MenusSelect a menu item Select a sub-menu itemSelect other menu items in the same way Select a setting valueClose the menu Mute Useful Functions When a Computer is ConnectedRemote control FreezeUseful Functions When a Computer is Connected Press the E-Zoom button on the remote controlZoom Using the Help When Having Some Trouble When the Indicators Provide No HelpUsing the Help Troubleshooting When Having Some TroubleCause Remedy or Status Status Cause Remedy or Status See Power IndicatorWhen Having Some Trouble Status Cause Remedy or StatusWhen the Indicators Provide No Help Condition Poor image quality out of focus or distorted Is the power for the video source or computer turned on?Has the front adjustable feet been adjusted Is the lens cover still attached?Has the correct resolution been selected? Position been adjusted correctly?When connected to a computer Probable cause Remedy Is the Zoom button setting correct?Have the colour intensity and tint been adjusted correctly? Has the image contrast been adjustedHas the colour been adjusted correctly? Is the lamp due for replacement?Has the correct audio input port been Is the accessory Epson cinema filter stillAttached to the projectors lens? Selected?Is the remote control too far from the projector? Minimum setting?Remote control does not work Has the battery insulating tape beenProbable cause Remedy Cooling fan does not stop Page Specifications Appearance Part Names and Functions MaintenanceOptional Accessories List of Supported Monitor Displays Glossary IndexCleaning the Projector Case MaintenanceCleaning Cleaning the Lens and Epson Cinema FilterRemove the old battery and insert the new battery Inserting the BatteryRemove the battery holder Replacing ConsumablesReplacing the Lamp Lamp Replacement PeriodMaintenance It is time to replace the lamp whenLoosen the two lamp fixing screws Install the new lampInstall the lamp cover Take out the lampConnect the power cable, and then Resetting the Lamp Operating TimeConfiguration menu will be displayed Replacing the Air Filter Optional Accessories Composite Video/S-Video Input List of Supported Monitor DisplaysComponent Video Input/RGB Video Input ComputerSpecifications Safety USAAppearance Part Names and Functions Adjusts the image focusReceives signals from the remote control Front/TopLeft Side Control PanelPart Names and Functions Rear BaseRemote Control Glossary Sync Glossary SRGBVideo SynchronisationIndex General TermsIndex Remote control light-receiving areaUsing the Configuration Menu Functions Rear ProjDeclaration of Conformity FCC Compliance Statement For United States Users EPSON/SEIKO Epson Corporation Printed on 100% recycled paper

EMP-30 specifications

The Epson EMP-30 is a portable projector that has garnered attention for its performance and versatility. Designed for both business presentations and home entertainment, the EMP-30 balances features that cater to a variety of users.

One of the standout characteristics of the Epson EMP-30 is its brightness. It offers a brightness level of 2,500 ANSI lumens, making it suitable for use in both well-lit and dim environments. This feature ensures that images remain clear and vibrant, even under challenging lighting conditions. The resolution of the projector stands at XGA (1024 x 768), which is ideal for standard presentations and displays. This high resolution ensures text and images are sharp, making it easier to engage an audience.

The EMP-30 uses 3LCD technology, which is known for producing vivid colors and consistent image quality. Unlike traditional projectors that rely on a single light source, 3LCD utilizes three separate liquid crystal panels to project red, green, and blue light simultaneously. This results in enhanced color accuracy and a broader color gamut, which is particularly noticeable in presentations featuring detailed graphics or videos.

Portability is another key feature of the Epson EMP-30. Weighing around 2.8 kg, it is lightweight enough to be transported easily between home, office, or educational environments. The compact design makes it user-friendly, allowing for quick setups in various locations.

Connectivity options are plentiful, including VGA, composite, and S-video inputs, enabling compatibility with a wide array of devices such as laptops, DVD players, and gaming consoles. The EMP-30 also features an audio output to connect external speakers for improved sound quality during presentations or movie screenings.

Another notable characteristic is its lamp longevity. The ECO mode extends the lamp life up to 5,000 hours, reducing maintenance costs and the frequency of replacements.

Additionally, the EMP-30 offers convenient features such as automatic vertical keystone correction, ensuring that images are displayed correctly even if the projector is angled. The user-friendly interface simplifies operation, making it accessible for users of all experience levels.

In conclusion, the Epson EMP-30 stands out as a versatile and reliable projector suitable for various applications. With its brightness, advanced 3LCD technology, portability, and user-friendly features, it is an excellent choice for anyone in need of a dependable projection solution.