Epson EMP-30 manual Declaration of Conformity

Page 65

DECLARATION of CONFORMITY

According to 47CFR, Part 2 and 15

Class B Personal Computers and Peripherals; and/or

CPU Boards and Power Supplies used with Class B

Personal Computers

We

: EPSON AMERICA, INC.

Located at

: 3840 Kilroy Airport Way

 

MS: 3-13

 

Long Beach, CA 90806

Tel

: 562-290-5254

Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR 2.909. Operation is subject to the following two conditions :

(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Trade Name

: EPSON

Type of Product

: Projector

Model

: EMP-30 / ELP-30

Image 65
Contents Page Meaning of unit and projector About the Manuals and Notations UsedGeneral information Contents Epson cinema filter function Features of the ProjectorPage Page Turning On the Projector Turning Off the Projector Adjusting the Screen ImageAdjusting the Image Quality Turning On the Projector Connecting the Power CableBasic Operations Turning On the Power and Projecting ImagesIBM Turning On the ProjectorTurning Off the Projector Turning Off the Projector Retract the front adjustable feet if they are extendedAttach the lens cover Adjusting the Image Size Adjusting the Screen ImageFocusing the Screen Image Turn the focus ring to adjust the image focusSeen from the side Seen from above Adjusting the Image AngleAdjusting the Screen Image Approx º above Approx º below Correcting Keystone DistortionUsing the Epson Cinema Filter Adjusting the Image QualityAttach the accessory Epson cinema Quality of the screen images can be adjusted as followsBasic Selecting the Colour ModeOperations Adjusting the Image Quality Adjusting Computer ImagesAutomatic Setup Press the and buttons to set the tracking value Adjusting the TrackingPress the and buttons to set the sync value Adjusting the SyncUseful Functions When a Computer is Connected Using the Configuration Menu FunctionsVideo Menu Sub-menu Function Default Using the Configuration Menu FunctionsVideo Menu Video S-Video, Composite video, ComponentSub-menu Function Default Settings and Useful FunctionsComputer Analogue-RGB/RGB video Using the Configuration Menu FunctionsSignal is being input Setting MenuAudio Menu BlueAdvanced Menu Using the Configuration Menu Functions Sub-menu DefaultImages are horizontally and vertically reversed Reset Settings and UsefulLanguage setting to their default settings About MenuReset All Menu Select a menu item Using the Configuration MenusConfirm the selection Select a sub-menu itemClose the menu Select a setting valueSelect other menu items in the same way Remote control Useful Functions When a Computer is ConnectedMute FreezeZoom Press the E-Zoom button on the remote controlUseful Functions When a Computer is Connected When the Indicators Provide No Help Using the Help When Having Some TroubleUsing the Help Cause Remedy or Status When Having Some TroubleTroubleshooting When Having Some Trouble Power IndicatorStatus Cause Remedy or Status See Status Cause Remedy or StatusWhen the Indicators Provide No Help Has the front adjustable feet been adjusted Is the power for the video source or computer turned on?Condition Poor image quality out of focus or distorted Is the lens cover still attached?When connected to a computer Position been adjusted correctly?Has the correct resolution been selected? Probable cause Remedy Is the Zoom button setting correct?Has the colour been adjusted correctly? Has the image contrast been adjustedHave the colour intensity and tint been adjusted correctly? Is the lamp due for replacement?Attached to the projectors lens? Is the accessory Epson cinema filter stillHas the correct audio input port been Selected?Remote control does not work Minimum setting?Is the remote control too far from the projector? Has the battery insulating tape beenProbable cause Remedy Cooling fan does not stop Page Optional Accessories List of Supported Monitor Displays MaintenanceSpecifications Appearance Part Names and Functions Glossary IndexCleaning MaintenanceCleaning the Projector Case Cleaning the Lens and Epson Cinema FilterRemove the battery holder Inserting the BatteryRemove the old battery and insert the new battery Replacing ConsumablesMaintenance Lamp Replacement PeriodReplacing the Lamp It is time to replace the lamp whenInstall the lamp cover Install the new lampLoosen the two lamp fixing screws Take out the lampConfiguration menu will be displayed Resetting the Lamp Operating TimeConnect the power cable, and then Replacing the Air Filter Optional Accessories Component Video Input/RGB Video Input List of Supported Monitor DisplaysComposite Video/S-Video Input ComputerSpecifications USA SafetyAppearance Receives signals from the remote control Adjusts the image focusPart Names and Functions Front/TopPart Names and Functions Control PanelLeft Side Base RearRemote Control Glossary Video Glossary SRGBSync SynchronisationGeneral Terms IndexUsing the Configuration Menu Functions Remote control light-receiving areaIndex Rear ProjDeclaration of Conformity FCC Compliance Statement For United States Users EPSON/SEIKO Epson Corporation Printed on 100% recycled paper

EMP-30 specifications

The Epson EMP-30 is a portable projector that has garnered attention for its performance and versatility. Designed for both business presentations and home entertainment, the EMP-30 balances features that cater to a variety of users.

One of the standout characteristics of the Epson EMP-30 is its brightness. It offers a brightness level of 2,500 ANSI lumens, making it suitable for use in both well-lit and dim environments. This feature ensures that images remain clear and vibrant, even under challenging lighting conditions. The resolution of the projector stands at XGA (1024 x 768), which is ideal for standard presentations and displays. This high resolution ensures text and images are sharp, making it easier to engage an audience.

The EMP-30 uses 3LCD technology, which is known for producing vivid colors and consistent image quality. Unlike traditional projectors that rely on a single light source, 3LCD utilizes three separate liquid crystal panels to project red, green, and blue light simultaneously. This results in enhanced color accuracy and a broader color gamut, which is particularly noticeable in presentations featuring detailed graphics or videos.

Portability is another key feature of the Epson EMP-30. Weighing around 2.8 kg, it is lightweight enough to be transported easily between home, office, or educational environments. The compact design makes it user-friendly, allowing for quick setups in various locations.

Connectivity options are plentiful, including VGA, composite, and S-video inputs, enabling compatibility with a wide array of devices such as laptops, DVD players, and gaming consoles. The EMP-30 also features an audio output to connect external speakers for improved sound quality during presentations or movie screenings.

Another notable characteristic is its lamp longevity. The ECO mode extends the lamp life up to 5,000 hours, reducing maintenance costs and the frequency of replacements.

Additionally, the EMP-30 offers convenient features such as automatic vertical keystone correction, ensuring that images are displayed correctly even if the projector is angled. The user-friendly interface simplifies operation, making it accessible for users of all experience levels.

In conclusion, the Epson EMP-30 stands out as a versatile and reliable projector suitable for various applications. With its brightness, advanced 3LCD technology, portability, and user-friendly features, it is an excellent choice for anyone in need of a dependable projection solution.