Epson EMP-30 manual About the Manuals and Notations Used, General information

Page 2

About the Manuals and Notations Used

Types of Manual

The documentation for your EPSON projector is divided into the following four manuals. Refer to the manuals in the order given below.

Unpacking and Installation Guide

This manual contains information on the procedures from unpacking the projector through to starting to use the projector, and also describes the included accessories.

Safety Instructions/World-Wide Warranty Terms

This manual contains information on using the projector safely, and also includes safety instructions, world- wide warranty terms and a troubleshooting check sheet.

Be sure to read this manual thoroughly before using the projector.

Setup Guide

This manual describes the preparations required in order to start using the projector (such as remote control preparation and connecting video equipment or a computer).

User’s Guide (this manual)

This User’s Guide contains information on basic operation, using the configuration menus, troubleshooting and maintenance.

Notations Used in This User’s Guide

General information

Indicates procedures where personal injury or damage to the projector may occur if the procedures are not followed correctly.

 

Indicates additional information and points which may be useful to know regarding a topic.

 

Indicates that an explanation of the underlined word or words in front of this symbol appears

 

in the glossary of terms.

 

Refer to the "Glossary" in the "Appendices". (p.59)

Procedure

Indicates operating methods and the order of operations.

The procedure indicated should be carried out in the order of the numbers.

 

Meaning of "unit" and "projector"

When "unit" or "projector" appears in the text of this User's Guide, it may refer to items which are accessories or optional equipment in addition to the main projector unit itself.

Image 2
Contents Page Meaning of unit and projector About the Manuals and Notations UsedGeneral information Contents Features of the Projector Epson cinema filter functionPage Page Turning On the Projector Turning Off the Projector Adjusting the Screen ImageAdjusting the Image Quality Connecting the Power Cable Turning On the ProjectorTurning On the Power and Projecting Images Basic OperationsTurning On the Projector IBMTurning Off the Projector Turning Off the Projector Retract the front adjustable feet if they are extendedAttach the lens cover Focusing the Screen Image Adjusting the Screen ImageAdjusting the Image Size Turn the focus ring to adjust the image focusSeen from the side Seen from above Adjusting the Image AngleAdjusting the Screen Image Correcting Keystone Distortion Approx º above Approx º belowAttach the accessory Epson cinema Adjusting the Image QualityUsing the Epson Cinema Filter Quality of the screen images can be adjusted as followsBasic Selecting the Colour ModeOperations Adjusting the Image Quality Adjusting Computer ImagesAutomatic Setup Adjusting the Tracking Press the and buttons to set the tracking valueAdjusting the Sync Press the and buttons to set the sync valueUsing the Configuration Menu Functions Useful Functions When a Computer is ConnectedVideo Menu Using the Configuration Menu FunctionsVideo Menu Sub-menu Function Default Video S-Video, Composite video, ComponentSettings and Useful Functions Sub-menu Function DefaultUsing the Configuration Menu Functions Computer Analogue-RGB/RGB videoAudio Menu Setting MenuSignal is being input BlueUsing the Configuration Menu Functions Sub-menu Default Advanced MenuLanguage setting to their default settings Settings and UsefulImages are horizontally and vertically reversed Reset About MenuReset All Menu Confirm the selection Using the Configuration MenusSelect a menu item Select a sub-menu itemClose the menu Select a setting valueSelect other menu items in the same way Mute Useful Functions When a Computer is ConnectedRemote control FreezeZoom Press the E-Zoom button on the remote controlUseful Functions When a Computer is Connected Using the Help When Having Some Trouble When the Indicators Provide No HelpUsing the Help Cause Remedy or Status When Having Some TroubleTroubleshooting Status Cause Remedy or Status See Power IndicatorWhen Having Some Trouble Status Cause Remedy or StatusWhen the Indicators Provide No Help Condition Poor image quality out of focus or distorted Is the power for the video source or computer turned on?Has the front adjustable feet been adjusted Is the lens cover still attached?Has the correct resolution been selected? Position been adjusted correctly?When connected to a computer Probable cause Remedy Is the Zoom button setting correct?Have the colour intensity and tint been adjusted correctly? Has the image contrast been adjustedHas the colour been adjusted correctly? Is the lamp due for replacement?Has the correct audio input port been Is the accessory Epson cinema filter stillAttached to the projectors lens? Selected?Is the remote control too far from the projector? Minimum setting?Remote control does not work Has the battery insulating tape beenProbable cause Remedy Cooling fan does not stop Page Specifications Appearance Part Names and Functions MaintenanceOptional Accessories List of Supported Monitor Displays Glossary IndexCleaning the Projector Case MaintenanceCleaning Cleaning the Lens and Epson Cinema FilterRemove the old battery and insert the new battery Inserting the BatteryRemove the battery holder Replacing ConsumablesReplacing the Lamp Lamp Replacement PeriodMaintenance It is time to replace the lamp whenLoosen the two lamp fixing screws Install the new lampInstall the lamp cover Take out the lampConfiguration menu will be displayed Resetting the Lamp Operating TimeConnect the power cable, and then Replacing the Air Filter Optional Accessories Composite Video/S-Video Input List of Supported Monitor DisplaysComponent Video Input/RGB Video Input ComputerSpecifications Safety USAAppearance Part Names and Functions Adjusts the image focusReceives signals from the remote control Front/TopPart Names and Functions Control PanelLeft Side Rear BaseRemote Control Glossary Sync Glossary SRGBVideo SynchronisationIndex General TermsIndex Remote control light-receiving areaUsing the Configuration Menu Functions Rear ProjDeclaration of Conformity FCC Compliance Statement For United States Users EPSON/SEIKO Epson Corporation Printed on 100% recycled paper

EMP-30 specifications

The Epson EMP-30 is a portable projector that has garnered attention for its performance and versatility. Designed for both business presentations and home entertainment, the EMP-30 balances features that cater to a variety of users.

One of the standout characteristics of the Epson EMP-30 is its brightness. It offers a brightness level of 2,500 ANSI lumens, making it suitable for use in both well-lit and dim environments. This feature ensures that images remain clear and vibrant, even under challenging lighting conditions. The resolution of the projector stands at XGA (1024 x 768), which is ideal for standard presentations and displays. This high resolution ensures text and images are sharp, making it easier to engage an audience.

The EMP-30 uses 3LCD technology, which is known for producing vivid colors and consistent image quality. Unlike traditional projectors that rely on a single light source, 3LCD utilizes three separate liquid crystal panels to project red, green, and blue light simultaneously. This results in enhanced color accuracy and a broader color gamut, which is particularly noticeable in presentations featuring detailed graphics or videos.

Portability is another key feature of the Epson EMP-30. Weighing around 2.8 kg, it is lightweight enough to be transported easily between home, office, or educational environments. The compact design makes it user-friendly, allowing for quick setups in various locations.

Connectivity options are plentiful, including VGA, composite, and S-video inputs, enabling compatibility with a wide array of devices such as laptops, DVD players, and gaming consoles. The EMP-30 also features an audio output to connect external speakers for improved sound quality during presentations or movie screenings.

Another notable characteristic is its lamp longevity. The ECO mode extends the lamp life up to 5,000 hours, reducing maintenance costs and the frequency of replacements.

Additionally, the EMP-30 offers convenient features such as automatic vertical keystone correction, ensuring that images are displayed correctly even if the projector is angled. The user-friendly interface simplifies operation, making it accessible for users of all experience levels.

In conclusion, the Epson EMP-30 stands out as a versatile and reliable projector suitable for various applications. With its brightness, advanced 3LCD technology, portability, and user-friendly features, it is an excellent choice for anyone in need of a dependable projection solution.