Epson EMP-30 manual Adjusting the Image Quality, Using the Epson Cinema Filter

Page 16

Adjusting the Image Quality

The quality of the screen images can be adjusted as follows.

Using the EPSON Cinema Filter

When the accessory EPSON cinema filter is attached to the projector and the "EPSON Cinema Filter" command is set to "ON", the images are adjusted to the optimum tint for movie theatre images.

If a computer is connected and the projector is being used for a presentation at such times, images will appear darker than normal, so remove the EPSON cinema filter and change the "EPSON Cinema Filter" setting to "OFF".

Procedure

1

Attach the accessory EPSON cinema

Projectionfilter.

Align the projection on the focus ring with the notch in the EPSON cinema filter and attach the EPSON cinema filter.

•The EPSON cinema filter should always be installed so that the notch is aligned with the projection on the focus ring. If the EPSON cinema filter is not installed correctly, unevenness or lack of focus may occur in the projected images.

•Do not touch the glass surfaces of the EPSON cinema filter or the projector's lens when attaching the EPSON cinema filter. If fingerprints or smears get on the glass surfaces, it will reduce the clarity of projection.

2

Video

 

EPSON Cinema Filter :

ON

OFF

 

Audio

 

 

Position

 

Adjust

 

 

 

Setting

 

 

Brightness

:

0

 

-

 

 

+

 

Advanced

 

 

Contrast

:

0

 

-

 

 

+

 

About

 

 

Color

:

0

 

-

 

 

+

 

Reset All

 

 

Tint

:

0

 

-

 

 

+

 

 

 

 

Sharpness

:

0

 

-

 

 

+

 

 

 

 

Color Mode

 

Select [Theatre

]

 

 

 

 

Video Signal

 

Select [Auto

]

 

 

 

 

 

Aspect Ratio:

4:

3

 

16:

9

 

 

 

 

 

Reset

 

 

Execute

 

 

 

 

: Return

/

: Select

: Set

 

 

 

 

 

 

 

Press the [Menu] button on the remote control, and then select "EPSON Cinema Filter" from the "Video" menu.

For details on this operation, refer to "Using the Configuration Menus". (p.27)

3 Select "ON" and then press the [Enter] button.

4 After changing the setting, press the [Menu] button to exit the configuration menu.

14

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Page General information About the Manuals and Notations UsedMeaning of unit and projector Contents Features of the Projector Epson cinema filter functionPage Page Adjusting the Image Quality Turning Off the Projector Adjusting the Screen ImageTurning On the Projector Connecting the Power Cable Turning On the ProjectorTurning On the Power and Projecting Images Basic OperationsTurning On the Projector IBMTurning Off the Projector Attach the lens cover Retract the front adjustable feet if they are extendedTurning Off the Projector Adjusting the Screen Image Adjusting the Image SizeFocusing the Screen Image Turn the focus ring to adjust the image focusAdjusting the Screen Image Adjusting the Image AngleSeen from the side Seen from above Correcting Keystone Distortion Approx º above Approx º belowAdjusting the Image Quality Using the Epson Cinema FilterAttach the accessory Epson cinema Quality of the screen images can be adjusted as followsOperations Selecting the Colour ModeBasic Automatic Setup Adjusting Computer ImagesAdjusting the Image Quality Adjusting the Tracking Press the and buttons to set the tracking valueAdjusting the Sync Press the and buttons to set the sync valueUsing the Configuration Menu Functions Useful Functions When a Computer is ConnectedUsing the Configuration Menu Functions Video Menu Sub-menu Function DefaultVideo Menu Video S-Video, Composite video, ComponentSettings and Useful Functions Sub-menu Function DefaultUsing the Configuration Menu Functions Computer Analogue-RGB/RGB videoSetting Menu Signal is being inputAudio Menu BlueUsing the Configuration Menu Functions Sub-menu Default Advanced MenuSettings and Useful Images are horizontally and vertically reversed ResetLanguage setting to their default settings About MenuReset All Menu Using the Configuration Menus Select a menu itemConfirm the selection Select a sub-menu itemSelect other menu items in the same way Select a setting valueClose the menu Useful Functions When a Computer is Connected Remote controlMute FreezeUseful Functions When a Computer is Connected Press the E-Zoom button on the remote controlZoom Using the Help When Having Some Trouble When the Indicators Provide No HelpUsing the Help Troubleshooting When Having Some TroubleCause Remedy or Status Power Indicator When Having Some TroubleStatus Cause Remedy or Status See Status Cause Remedy or StatusWhen the Indicators Provide No Help Is the power for the video source or computer turned on? Has the front adjustable feet been adjustedCondition Poor image quality out of focus or distorted Is the lens cover still attached?Position been adjusted correctly? When connected to a computerHas the correct resolution been selected? Probable cause Remedy Is the Zoom button setting correct?Has the image contrast been adjusted Has the colour been adjusted correctly?Have the colour intensity and tint been adjusted correctly? Is the lamp due for replacement?Is the accessory Epson cinema filter still Attached to the projectors lens?Has the correct audio input port been Selected?Minimum setting? Remote control does not workIs the remote control too far from the projector? Has the battery insulating tape beenProbable cause Remedy Cooling fan does not stop Page Maintenance Optional Accessories List of Supported Monitor DisplaysSpecifications Appearance Part Names and Functions Glossary IndexMaintenance CleaningCleaning the Projector Case Cleaning the Lens and Epson Cinema FilterInserting the Battery Remove the battery holderRemove the old battery and insert the new battery Replacing ConsumablesLamp Replacement Period MaintenanceReplacing the Lamp It is time to replace the lamp whenInstall the new lamp Install the lamp coverLoosen the two lamp fixing screws Take out the lampConnect the power cable, and then Resetting the Lamp Operating TimeConfiguration menu will be displayed Replacing the Air Filter Optional Accessories List of Supported Monitor Displays Component Video Input/RGB Video InputComposite Video/S-Video Input ComputerSpecifications Safety USAAppearance Adjusts the image focus Receives signals from the remote controlPart Names and Functions Front/TopLeft Side Control PanelPart Names and Functions Rear BaseRemote Control Glossary Glossary SRGB VideoSync SynchronisationIndex General TermsRemote control light-receiving area Using the Configuration Menu FunctionsIndex Rear ProjDeclaration of Conformity FCC Compliance Statement For United States Users EPSON/SEIKO Epson Corporation Printed on 100% recycled paper

EMP-30 specifications

The Epson EMP-30 is a portable projector that has garnered attention for its performance and versatility. Designed for both business presentations and home entertainment, the EMP-30 balances features that cater to a variety of users.

One of the standout characteristics of the Epson EMP-30 is its brightness. It offers a brightness level of 2,500 ANSI lumens, making it suitable for use in both well-lit and dim environments. This feature ensures that images remain clear and vibrant, even under challenging lighting conditions. The resolution of the projector stands at XGA (1024 x 768), which is ideal for standard presentations and displays. This high resolution ensures text and images are sharp, making it easier to engage an audience.

The EMP-30 uses 3LCD technology, which is known for producing vivid colors and consistent image quality. Unlike traditional projectors that rely on a single light source, 3LCD utilizes three separate liquid crystal panels to project red, green, and blue light simultaneously. This results in enhanced color accuracy and a broader color gamut, which is particularly noticeable in presentations featuring detailed graphics or videos.

Portability is another key feature of the Epson EMP-30. Weighing around 2.8 kg, it is lightweight enough to be transported easily between home, office, or educational environments. The compact design makes it user-friendly, allowing for quick setups in various locations.

Connectivity options are plentiful, including VGA, composite, and S-video inputs, enabling compatibility with a wide array of devices such as laptops, DVD players, and gaming consoles. The EMP-30 also features an audio output to connect external speakers for improved sound quality during presentations or movie screenings.

Another notable characteristic is its lamp longevity. The ECO mode extends the lamp life up to 5,000 hours, reducing maintenance costs and the frequency of replacements.

Additionally, the EMP-30 offers convenient features such as automatic vertical keystone correction, ensuring that images are displayed correctly even if the projector is angled. The user-friendly interface simplifies operation, making it accessible for users of all experience levels.

In conclusion, the Epson EMP-30 stands out as a versatile and reliable projector suitable for various applications. With its brightness, advanced 3LCD technology, portability, and user-friendly features, it is an excellent choice for anyone in need of a dependable projection solution.
Top Page Image Contents