Icom DS-100 When Receiving a Call, To receive a DSC call, When receiving a DSC call

Page 13

WHEN RECEIVING A CALL 3

■To receive a DSC call

• Monitoring the traffic frequency

DWhen receiving a DSC call

You should act in one of the following ways depending on the received DSC format (or category):

•Wait for a voice transmission on the traffic frequency.

•Transmit an acknowledgement with DSC or voice.

•Transmit a distress relay call (only when the ship in dis- tress requires voice communications).

The calling station transmits via voice on the traffic frequency.

•Emergency alarm (or con- tinuous beeps depending on the category) sounds until pushing [CLR].

—RCV All ships call—

From: ICOM DSC

Category: Routine

<CLR∀Exit / ENT∀OK>

When receiving an All ships calll.

• Transmit an acknowledgement

DDisplay example and operation

• Monitoring the traffic frequency and ...

Monitor the communication between the calling ship and a coast station. When no communication is made, contact the ship using voice transmission.

•Emergency alarm sounds for 2 min., or push [CLR] to cancel the alarm.

When the following DSC is re- ceived, an ‘acknowledgement’ must be sent back to the calling station.

•Continuous beeps (or emer- gency alarm depending on the category) sounds until pushing [CLR].

—RCV Individual ACK—

From: ICOM DSC

Able to comply

<CLR∀Exit / ENT∀OK>

When receiving an Individual acknowledgement.

9

Page 12 Page 14
Image 13
Page 12 Page 14
Contents DS-100 Shock may occur Personal injury, fire hazard or electricEquipment damage may occur If disregarded, inconvenience only. No riskPage Table of Contents Front panel Panel DescriptionTime Zone Indicator GPS IndicatorPosition Indicator Function displayCall Procedure Distress call/Regular operation Entry Position/Time Individual call Distress call to shipsAll ships call Group callAfter receiving acknowledgement call When no acknowledgement is receivedWhen receiving a DSC call When Receiving a CallTo receive a DSC call Display example and operationPush ENT, then the oper When receive a Distress callWhen receiving a Position request When receiving an All ships callWhen receiving a Postion reply When receiving a Distress Relay ACK When receiving a Distress ACK When receiving a group callDistress message Received message RCV MSGIndividual call Other messagesGroup call Distress All shipsDistress relay Distress acknowledgement Distress relay acknowledgement q Push CALL, then push √Select ‘Set-up’ SET-UPAddress ID Add an address IDAdd a group ID Delete address IDDelete a group ID Brightness Offset timeContrast Mmsi checkConnection diagram Connection and InstallationsRear panel description Supplied accessoriesOverhead Mounting MountingInternational channels VHF Marine Channel ListSpecifications Specifications and OptionsOptions Dimensions Instructions Supplied accessoriesMB-75 Page Template Page 0560 Count on us

DS-100 specifications

The Icom DS-100 is a sophisticated digital signal processor designed to enhance the performance of communication systems. As a testament to Icom's commitment to innovation, the DS-100 comes equipped with a variety of features suited for both amateur and professional radio operators. Its robust design integrates advanced technologies that significantly improve audio clarity and reduce background noise, making it a valuable tool in various communication scenarios.

One of the main features of the DS-100 is its digital noise reduction capability, which employs sophisticated algorithms to analyze and filter out unwanted background sounds. This results in clearer audio transmission and reception, enabling users to communicate more effectively even in challenging environments. The unit also offers adjustable settings, allowing users to fine-tune the noise reduction levels according to their preferences and the specific conditions they are operating in.

Another notable characteristic of the DS-100 is its wide frequency range compatibility, allowing it to function seamlessly with various Icom transceivers. This versatility ensures that operators can utilize the DS-100 across different frequency bands, making it an ideal choice for multi-band communication. The device is also designed for ease of use, featuring a user-friendly interface that simplifies configuration and operation.

The DS-100 is built with durable materials, emphasizing Icom's reputation for quality and longevity. Its compact and lightweight design makes it portable, enabling operators to take it on their travels or deploy it in the field with ease. This rugged construction is complemented by advanced thermal management systems, ensuring reliable performance even under extended usage or in varying environmental conditions.

In addition to its technical features, the Icom DS-100 supports various connectivity options, including USB and other standard interfaces. This allows for easy integration with computers and other devices, providing enhanced flexibility for data transfer and system upgrades.

Overall, the Icom DS-100 stands out as a powerful tool for enhancing communication efficiency and clarity. Its combination of advanced digital signal processing technology, robust design, and versatile functionality make it an essential addition for anyone serious about effective radio communications. Whether in emergency services, amateur radio operations, or professional use, the DS-100 delivers unparalleled performance that meets the demands of modern communications.
Top Page Image Contents