Icom DS-100 instruction manual Offset time, Brightness, Contrast, Mmsi check

<MMSI check> 267350012

<Offset time> —09:30

<CLR➝ Exit / ENT➝ OK>

■Offset time

Local time can be used when the GPS position data is valid and off set time is input.

qPush [CALL], then push [√] one or more times to select

‘Set-up’, then push [ENT].

wSelect ‘Offset time’, then

push [ENT].

ePush “0; –” or “1; space”, then input the time differences. r Push [ENT] to determine the time or push [CLR] to exit the

Set-up menu.

■Brightness

• Adjusting the brightness

qPush [CALL], then push [√] one or more times to select ‘Set-up’, then push [ENT].

wSelect ‘Brightness’, then push [ENT].

ePush [Y] or [Z] one or more times (or numeral keys in- stead) to adjust the brightness.

• Brightness level indication; 1 (dark) to 8 (bright)

rPush [ENT] to determine the brightness or push [CLR] to exit the Set-up menu.

SET-UP 4

■Contrast

• Adjusting the contrast

qPush [CALL], then push [√] one or more times to select ‘Set-up’, then push [ENT].

wSelect ‘Contrast’, then push [ENT].

ePush [Y] or [Z] one or more times (or numeral keys in- stead) to adjust the contrast.

• Contrast level indication; 1 (low) to 8 (high)

rPush [ENT] to determine the brightness or push [CLR] to exit the Set-up menu.

■MMSI check

Your ID code can be displayed via the set-up menu.

• Check your ID

qPush [CALL], then push [√] one or more times to select ‘Set-up’, then push [ENT].

wSelect ‘MMSI check’, then

push [ENT].

e Your ID code shows on the display.

rPush [CLR] to exit the Set-up menu.

<CLR∀Exit>

19