Icom DS-100 instruction manual Set-Up, Select ‘Set-up’, Address ID, Add an address ID

<Select a subject>

≈Add an address ID Delete address ID Add a group ID Delete a group ID

<CLR➝ Exit / ENT➝ OK>

<Add an adress ID>a* ID:(9digit) Name:(15charactors)

<CLR➝ Exit / ENT➝ OK>

■Select ‘Set-up’

The following setting/operations available in ‘Set-up’ menu.

•Address ID

•Offset time

•Brightness

•Contrast

•MMSI check

SET-UP 4

■Address ID

A total of 70 address ID can be programmed as “Address ID” (for ships and coast stations) and “Group ID” (for group sta- tion).

• Add an address ID

qPush [∫]/[√] several times to

qPush [CALL], then push [√] several times to select ‘Set- up’, then push [ENT].

wSelect ‘Set-up’, then push [ENT].

•‘Set-up’ menu appears on

the screen.

ePush [CLR] to exit the Set-up menu.

<Select a subject>

Individual ACK Group call All ships call Received calls Distress setting ≈Set-up

<Select a subject>

≈Address ID

Offset time

Brightness

Contrast

MMSI CHECK

<CLR➝ Exit / ENT➝ OK>

select ‘Add an address ID’, then push [ENT].

w Push numeral keys to input an address ID code, then push [ENT].

•When a wrong number is input, push [CLR], then correct the

number again.

e Enter the desired name for the ID code, then push [ENT].

• Push [A/a] several times to tog- gle capital letters, small letters and numerals.

•Push the corresponding key

one or more times to input the desired character.

•Push [BS] to erase the character.

•Push [Ω] to reverse the cursor position; [≈] ot forward the cursor position.

rPush [CLR] to exit the screen.

17