NEC 2000 IPS manual House Phone, Maid Status

Page 348

Chapter 17 Hotel/Motel System

House Phone

This feature allows selected stations to reach the Attendant simply by going off-hook.

House Phones may be equipped without dials.

House Phone assignments are programmed into system data from the Maintenance Administration Terminal (MAT) or the Customer Administration Terminal (CAT).

There is no limit to the number of House Phones permitted in the system provided the maximum amount of available ports is not exceeded.

The Attendant has the option to process the call using the delay or non-delay operation or passing dial tone to House Phones with dials.

The system’s response to a hook flash from a House Phone can be assigned to provide feature dial tone or recall the Attendant.

Four house phone groups are available.

Each house phone group can be assigned to automatically call the Attendant Console or a predestinated station.

Maid Status

This feature allows the Hotel/Motel (H/M) Front Desk Instrument, Property Management System (PMS) terminal, or guest room station (using special access code) to register the condition of each guest room. There are a maximum of eight types of room conditions.

Although the system provides for a maximum of eight types of room conditions, the eight codes (1-8) provided are not fixed for a given condition. This provides the end user with the flexibility to select any code (1-8) to serve as the Maid Status code for any condition. When Maid Status is displayed, or printed out, the digit(s) dialed as the code when the Maid Status was last changed are displayed or printed.

When dialing from a guest station, a Maid Identification Code (maid ID code) can be provided (up to two digits). This is allowed or denied in system programming. Status number Room condition (example; see below)

1.Check In

2.Check Out

3.Under Cleaning

4.Cleaning Finished

5.Check Finished

6.Out of Service

7.Needs Maintenance

8.Maintenance Complete

Page 17-8

UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide

 

Issue 6

Image 348
Contents Univerge Neax 2000 IPS MayNEC Unified Solutions, Inc Liability DisclaimerInaset OAI Application Software Development ChapterIsdn Basic Rate Interface BRI Univerge Neax 2000 IPS Documentation List Introduction Overview of NECInvention Age Industrial AgeElectronic Age Components Information AgeWorldwide Leadership Communications Social ContributionsGlobal Resources PeopleAssets InnovationCommunity EducationNEC Unified Solutions, Inc Development ActivitiesDALLAS, TexasMajor Product AreasVertical Markets Competitive Benefits and AdvantagesIntroduction Introduction Univerge Neax 2000 IPS Maintenance Station to Station ConnectionCcis Connection PstnOffice Data Backup Enhancement Various Installation MethodsBuilt-in DRS Device Registration Server on MP Reduced Hardware with IP based ArchitectureDC/DC Power Supply for Universal SlotExtended Application Processor AP Port Capacity Dual MP SystemUniverge Neax IPS DML System Outline for Remote PIMCharacteristics of the Univerge Neax IPS DM/IPS DML/IPS DMR Advantages of Remote PIMStand Alone System Capacity IPS System Capacity Single MP System Capacity Per PIMPIM1 PIM2 PIM3 PIM4 PIM5 PIM6 PIM7 IP PADIPS System Capacity Single MP System cont’d Capacity Per PIM IPS System Capacity Dual MP System Capacity Per PIM 2M-AMIIPS System Capacity Dual MP System, Cont’d Capacity Per PIM IPS DM/IPS DML System Capacity Capacity Per MCIP-PAD 8LCBuilt-in Router Max card per Site Dtmf Sender IP Remote Network Capacity Total System Capacity Main plus RemoteCapacity IPS DMR Capacity DTI IsdnIPS Pimmj As Remote PIM Capacity Voice and Data Switching System ArchitectureHardware Architecture Hardware Design Fusion of RAM and ROM ProgramsMain Processor MP with Integrated Functionality Application ProcessorsIntegration Unified Circuit CardSN716 Attendant Console Analog/Digital TelephonesUniverge Neax 2000 IPS System Configuration PIMModule and Installation Hardware Single MP SystemDual MP System ModulesInstallation Hardware Installation HardwareAbbrev Description Quantity Battery Backup Name Code Qty RemarksCabling Internal CablingMaintenance Administration Terminal MAT RS-232C External CablingExternal Alarm Display Built-in SMDR/MCI on MPSMDR/PMS/Hotel Printer/MCI with AP00B MRC-C Cable for AP00 Name Code Qty RemarksUniverge Neax IPS DM/IPS DML/IPS DMR System Configuration IPS DM/IPS DML Modular Chassis MCIPS DMR Modular Chassis MC Modular Chassis 2 Modular ChassisModular Chassis MC Installation Modular Chassis MC and BracketSystem Power Supply and Cooling Fan Software Architecture System PackagesPKG IPS DM to Univ DM Upgrade Kit Univ IPS DML IP SYS PKGUniv IPS DM IP SYS PKG-E Univ IPS DM/DML Expansion Module 1EIP Remote PIM Packages Description RemarksUniv IPS DMR SYS PKG-E Univ IP Remote PIM-B IPSSoftware Keys/Licenses Description Remarks Generic ProgramKey Keeper Parent Capacity Option Capacity Option used w/Key KeeperSystem Highlights ProcessorsMain Processor MP Name Code RemarksFirmware Processor FP PN-CP24-C PN-CP31-C PN-CP27-ADAT Application Processor AP Application Processor AP CardsAP Card FunctionReliability and Availability Chart Description Fit Reliability and AvailabilityMean Time Between Failures Mtbf Mtbf MttrReliability and Availability Chart Reliability Description Availability FitFit YearsReliability Description Availability Mean Time To Repair Mttr Reliability CalculationsAvailability Calculations Reliability CalculationSystem Traffic Traffic LoadBusy Hour Bhca Busy Hour Call AttemptsCalculation Procedure Traffic Capacity In Erlang For TDM CircuitsTraffic Capacity per Line For TDM Circuits Number of TrunksErlang B Table Traffic Internal Call Distribution External Line TrunkCOT Wireless PEG Count PEG CountTrunk PEG Count UCD PEG CountNumber of Voice Channels per IP Trunk Ccis Point-to-MultipointVoIP H.323 Payload size for Virtual IPTIP PAD Calculation IP PAD Calculation Number of extensions 100IP PAD Calculation Number of extensions 120 200 208 264 300 320 376 432System Specifications Transmission Characteristics For TDM Circuits Line ConditionsLoop Resistance including Opposite End Resistance Cable LengthRotary Dial Pulse and Dtmf Signaling Rotary Dial SignalDtmf Signal Description Specifications Receiving SendingMulti-frequency Compelled MFC R2 Signal Audible Tones and Ringing Signal Ringing SignalDimension and Weight Audible Tones Frequency InterruptionUniverge Neax IPS DM/IPS DML/IPS DMR System Specifications System SpecificationsEMC Open Industry StandardsIP Specifications FAX10BASE-T/100BASE-TX LAN interface transmission modes RemarksSystem Compliance Hipaa SummaryHipaa Compliance Department of Defense CompliancePage Module/Installation Hardware Equipment ListEquipment Name Function Name Equipment Name Remarks Circuit Cards Common Control CardsPN-CP31 PN-CP15Ether PN-PW00 ExtpwrApplication Processor Cards Application Processor Card Name and FunctionFunction Name Port Remarks Application Processor Cards SPN-AP00B DBM-C AP QsigLine/Trunk LT Cards Line/Trunk LT CardsSPN-2ILCA PN-8DLCLDeskcon PN-4DLCMPAD-E PAD-CPZ-24IPLA SPN-16VCTAA IPPN-8COTQ PN-4COTBPN-4COTG PN-2ODTAPN-2DATA PN-TNTASPN-IPTB-A SPN-4VCTI-ASPN-4CSIA PN-RTAPage Station Equipment Terminal Line UpDterm Series i Terminals Dterm Series E TerminalsWireless Handset InasetDterm IP Soft Phones Dterm ExtendersSpecification for Analog Terminals Physical FeaturesDescriptions of the Dterm IP Terminals Call Handling Features Convergence FeaturesDescriptions of Terminals DTR-2DT-1 BK TEL DTR-2DT-1 WH TEL DTR-4D-1BK TELDTR-16LD-1 BK TEL DTR-16LD-1 WH TEL DCR-60-1 BK Console DCR-60-1 WH ConsoleStandard features SpecificationTerminal Options Cable Length Standard With AC AdapterStandard features Dterm Series E Soft keysDescriptions of Series E Multi-line Digital Terminals Description of Series E Multi-line Digital Terminals Dterm Series E Accessories & Adapters ADA-UHFU-U APR-UACA-U WMU-UWMU-W IPW-2U ELCDterm Series E Specifications 2DT16D 32D Add-On DSSDterm Series E Line Conditions Loop Resistance and Distance Long Loop circuit built-inDterm Cordless Terminals Dterm Cordless II DTR-4R-2 BKOptions Dterm Cordless Lite II DTH-4R-1 BK OptionsSpecifications Plantronics CT CordlessInaset Applications Additional ApplicationsInaset Terminal Line UP Inaset Basic Network CapabilityPBX System Requirements WM-RL UnitDterm PS III Wireless Handset Dterm PS III OptionsKey Features and Benefits FeaturesLinks with PC applications Internet LinkReal Time Communication Presence/StatusVoice Recording Application CollaborationVoice Quality Alarm One Key OperationCall Log Export Line DisplayClient PC specification One Touch Button in Compact ModePB tone sending Pause into Dialing stringPBX Specification Must be peer to peer IP enabled Dterm SP30 Softphone Parts ListSoftware/Licenses/Accessories Dterm ExtendersService Conditions for Dterm Analog EXT Page Trunking Type of TrunksType of Trunk Circuit Package LT/APTrunk Card Specifications Trunk ParametersPN-AUCA SPN-BRTC PN-8RSTG Dtmf Receiver PN-4RSTBA MF Receiver for T1 MF ANIPN-4RSTC ID Number Receiver PN-4RSTBA-911 MF SenderSystem Trunking Capacity IPS Trunking Capacity System CapacityIPS DM/DML Trunk Capacity Least Cost Routing LCR Six Digit Least Cost RoutingRoute Restriction Class RSC Toll Restriction Digit Toll RestrictionPriority Restriction Class Page Attendant Answering Position Attendant Console SN716SN716 Deskcon General Features SN716 Deskcon Exclusive FeaturesDeskcon Exclusive Features Face Layout of the SN716 Deskcon Functions and use of Keys and Lamp Indications Location Key or Lamp Full Basic Key/Lamp Number DesignationLDN LCD SN716 Specifications Interface ’ty Remarks Power OptionsBusiness Attendant System BAS BAS Benefits Business Attendant System Directory Business Attendant System Additional Features Business Attendant System Speed Dials PadBusiness Attendant System Ccis Network Information Business Application Environment Hardware RequirementsPage System Administration System AdministrationCustomer Administration Terminal CAT Password EntryMaintenance Administration Terminal MAT PBX Configuration Wizard Mach Script EditorTraffic Management MATWorX PC RequirementsMinimum Requirements Recommended System Diagnostics Self Diagnostic/System MessagesRemote Maintenance Service ConditionsGeneral Service Conditions MP Program DownloadMP Download Process Program Download Service Conditions Program Changeover Service ConditionsRequired Hardware Equipment CommentsMA4000 Management System Feature Descriptions Business/Hotel/Data Feature ListBusiness/Hotel/Data Feature List Descriptions Snmp Business/Hotel/Data Feature Descriptions Attendant Assisted Calling Attendant Camp-on Full and Semi- automaticAttendant Console SN716 Deskcon Attendant Lamp Check Attendant Delay Announcement Authorization CodeAttendant Lockout Attendant OverflowAutomatic Call Distribution ACD Automatic Camp-onAutomatic Recall Automatic Wake-upBackground Music Back Up CPUBrokers Call Call BackCall Forwarding Call Park Call Pickup Call RedirectCall Transfer Caller ID ClassClass of Service Camp-onCentrex Compatibility Check In / Check OutConference Six/Ten Party Conference 32 PartyGroup Call Consecutive Speed DialingDelayed Ringing DiagnosticsData Line Security Dial By NameDirect Inward System Access Disa Direct Inward Termination DITDirect Outward Dialing DOD Direct Station Selection/Busy Lamp Field DSS/BLF ConsoleDo Not Disturb Distinctive RingingElapsed Call Timer Fax Arrival IndicatorDterm Assistant DtermIPFeature Activation from Secondary Extension Flexible Line Key AssignmentFlexible Numbering Plan Forced Account CodeIndividual Attendant Access Hands-free AnswerbackHands-free Dialing and Monitoring HoldIP Enabled Dterm Internal Zone Paging with Meet-MeLast Number Redial Least Cost Routing 3/6 DigitMiscellaneous Trunk Access Message Center Interface MCIMessage Registration Message ReminderMobility Access Night ServiceModem over IP MP Program Download FTPOff-hook Alarm No CID Call RoutingOff-Premises Extensions Pooled Line Access Power Failure TransferOptical Interface Pad LockAutomatic Idle Return Reserve Power Remote HoldRemote PIM over IP Resident System ProgramSecurity Alarm Single Digit Feature Access CodesSave and Repeat Set RelocationSystem Clock Setup by Station Dialing Tenant ServiceTerminal Login via NAT Tie Line Tandem SwitchingTimed Queue Uniform Call Distribution UCD Timed ReminderTrunk Direct Appearances Trunk Queuing OutgoingVoice Mail Private Password Uniform Numbering Plan UNP -Voice and DataVariable Timing Parameters Voice GuideVoice Mail Transfer Voice Over IP H.323VoIP Log Collection WhisperCcis Feature List Ccis Features Descriptions Call Forwarding Intercept Ccis Centralized E911 Ccis Flexible Numbering of Stations Ccis Multiple Call Forwarding All Calls Ccis Station-to-Station Calling Ccis Isdn Feature List Isdn Feature Descriptions Event-Based Ccis SIG Feature List SIG Feature DescriptionsWireless Feature List Table of Features by Configuration Type Feature Adjunct Type Integrated Type Analog PBXInterface Wired for Wireless Ccis Univerge Neax 2000 IPSWireless Feature Descriptions Group Call 2Way Calling This feature protects a call from being tapped Page System Input/Output I/O Interfaces Station Message Detail Recording Smdr2400 Extended Format IMS Format Smdr Terminal InterfaceSmdr w/AP00 Combinations between Smdr and Smdr Output Format Combinations available at the same timePattern D ARP, IP, ICMP, UDP, TCPCombinations for Center Office of Centralized Billing Combinations for Local Office of Centralized BillingData Transmission Sequence for Ethernet Interface System CapacityMessage Center Interface MCI Hardware Required for SmdrDescription Qty Remarks Hardware Required for MCI VMSModem Feature FeatureProperty Management System PMS Type of InformationPMS Interface Hardware Required for PMS Description Qty RemarksRS PRT-4S CA-A Open Application Interface System OutlineOpenWorX Attendant Statistics OpenWorX Business Attendant System BASBAS Call Control Functionality Brief Definition of Queues Brief Description of Call Control FunctionBAS Speed Dials Pad BAS DirectoryDid for Company Lookup BAS Offline Mode Pseudo Night Mode BAS Authorization and Account Code DialingBAS Overhead Paging BAS Call Recording and PlaybackOpenWorX Business Receptionist BR BR Speed Dials PadBR Directory BR Overhead PagingBR Authorization and Account Code Dialing OpenWorX Communications PortalBR Attendant PC Minimum Hardware Requirements Communications Portal Functionality Communications Portal BenefitsOpenWorX Dialer Dialer DatabaseDialer Benefits OpenWorX Location Status Information LSI OpenWorX Message Reader MROpenWorX Short Text Messaging MR BenefitsSTM Benefits OpenWorX Incoming Call Assistant ICA ICA FunctionalityICA Benefits OpenWorX Group Call Forward Control Gcfc ICA Comparison of ICA and IPS FunctionalityICA ICA vs. Camp On OpenWorX Personal Call Assistant PCA Gcfc FunctionalityPCA Limiting User Views PCA OpenWorX DesktopDesktop Directory Personal DirectoryOpenWorX Name Display PCA OpenWorX InasetOpenWorX Multiple Ccis Node Configuration OAI Application Software DevelopmentBAS Ccis Network Information Business Receptionist Ccis Network InformationPage Automatic Call Distribution ACD with MIS Automatic Call Distribution ACDBasic ACD Basic ACD Features Delay Announcement ACDBusy In/Busy Out ACD Call Waiting Indication ACDCallCenterWorX ACD 3.0 for Business Immediate Overflow ACDPriority Queuing ACD Queue Size Control-ACDCallCenterWorX ACD Features Automatic Call Distribution with MIS CallCenterWorX MIS Business Turnkey PackagesBusiness Software Only Packages CallCenterWorX ACD 3.0 for Business Turnkey PackagesCallCenterWorX MIS Business System Capacities Item ACD Capacities CallCenter WorX MIS5GB BhcaPBX Requirements Related DocumentsACD Terminals PBX Requirements RemarksMaster Contact Center Solutions MasterContact Routing Q-Control Reports Q-Control Announcements Q-AnnounceAgent Desktop Q-Desktop Callbacks Q-Callback Multi-Media Q-Email, Q-Chat, Q-FaxOutbound Dialing Q-Outdial Interactive Voice Response Q-IVRQueWorX 4.0 Features QueWorX 4.0 Licensed ApplicationsAuto Attendant Immediate Customer Callback Scheduled CallbacksInternet Initiated Callbacks Estimated Time to Answer ETAScreen Pop Soft PhoneMultilingual Announcements Global Repeat VerificationProfessional Services for QueWorX Customized AnnouncementsCustomizable Reports VoIP Solutions Extended Enterprise IP SolutionVoIP Solutions Voice over IP VoIPTypical IP Gateway, Branch and Adapter configurations Equipment Name FunctionIP Station Peer-to Peer Connections between IP Enabled Dterm Peer-to-Peer Connections over Ccis Networking via IPConnections to Legacy Stations and Trunks Remote Connections of IP StationsAutomatic Program Download for IP Enabled Dterm 8IPLA/24IPLA Options Per Location Service Conditions on Legacy Service Features Service Conditions on System RegistrationService Conditions on Encryption in System Registration Service Conditions on VlanMD5 is an algorithm defined in RFC 1321 from the Ietf Service Conditions on Remote Connections Local Connection Mode Remote Connection ModeLocation number in each operation mode for each IP station Operation mode for each IP terminalExample 1 When Sta logs in Location #1 Example 2 When Sta logs in Location #2Service Conditions on Automatic Program Download Ccis Networking via IP Required Equipment for IP StationSPN-32IPLAA IP PAD SPN-16VCTAA IP PADCcis Networking via IP Peer-to-Peer Connections Basis Ccis Networking via IP Non Peer-to-Peer Connections Basis Point-to-Multipoint ConnectionIP Trunk Point-to-Multipoint Connection Service Conditions IP Ccis via IP Trunk cards IP Trunk Card SpecificationsRequired Equipment for IP Ccis via IP Trunk cards Payload Period Maximum Voice Channels per IP TrunkConnection Features FeaturesService Conditions for H.323 IP Trunk Specifications Required Equipment for H.323FAX and Modem over IP Example of FAX and Modem over IP connectionSPN-8IPLA IP PAD-C SPN-8IPLA IP PAD-BSPN-8IPLA IP PAD-A SPN-32IPLA IP PAD-ERequired Equipment for FAX or Modem over IP Opposite Office 2000 IPSOpposite Office OwnRequired bandwidth for FAX Connection Required bandwidth for Modem ConnectionConnection Conditions Required Bandwidth One-way Remote PIM over IP Network Conditions and PayloadRequirement Remarks Bandwidth Requirement With G7.23.1 With G729a 8k Without Compression 3k/6.3kCompression Advantages Required Hardware and Software Host Site Equipment Name RemarksRemote Site Equipment Name Remarks List of Service Features Operation XNotePlanning and Installation Vendor Support for Open System StandardsVoice Messaging Bandwidth requirementsNetwork Consideration Network BandwidthBandwidth utilization Codec Filler Time MsecCodec Total Bandwidth per transmit stream Msec Quality of Service QoS Device Registration Server DRS and DhcpPort Type Destination Default Port No Remarks For Dterm IPFor Voice Control/Voice Packet For Ccis Virtual IPT For H.323 IP TrunkIPT Ccis PBX TCPSystem Conditions/Limitations Peer-to-Peer IP LimitationsConditions Common Channel Inter-Office Signaling Ccis System Outline of a Ccis Connection Ccis and Isdn Digital and Analog Ccis Digital CcisAnalog Ccis Peer-to-Peer Connections Voice CompressionCommon Channel Inter-Office Signaling Ccis Service Conditions on Non Peer-to-Peer Connections Ccis Networking via IP Non Peer-to-PeerCentralized Billing Local office/Tandem officeCenter office Common Channel Inter-Office Signaling Ccis Centralized E911 Ccis Call Set Up Times Look Ahead RoutingShared Trunk Facilities and Alternate Routing Alternate RoutingCentralized System Maintenance and Administration Centralized Maintenance FacilityCentralized Management Center Centralized Call Accounting/Billing Systems Centralized Call Accounting / BillingCentralized Voice Processing / Messaging Centralized Attendant ConsolesCcis Centralized Voice Mail Ccis Feature Chart Ccis Feature Name Neax 2400 RequiredUniform Numbering Plans YESCcis Feature Chart System Capacity System Capacity for Ccis with Digital InterfaceSystem Capacity for Ccis with Analog Interface System Capacity for Ccis Networking via IPRequired Equipment Required Equipment for Digital CcisRequired Equipment for Analog Ccis Required Equipment for Ccis Networking via IPIP Specifications Specifications RemarksPAD 24IPLADTI Specifications Characteristics ChannelPage Integrated Services Data Network Isdn PRI Services & FeaturesIsdn Feature List Isdn Primary Rate InterfaceCall-By-Call Service Selection Called Party Recognition Service Direct-In Termination DITCPN To Network-Present CPN To Terminating User-Display Did Addressing Did and DOD AddressingIsdn Terminal AT&TPage Megacom Access/WATS Megacom 800 Service/800 Wats Ultra WatsMultiquest /900 Service Subaddress-PresentTrunk Provisioning Service Selection Event Based CcisBusiness Feature List Business Feature ListSupported Network Services Trunk provisioned only Isdn Network Requirements for Layer OneIsdn PRI Specifications For 24DTIFor 30DTI For 24PRTBRT Dedicated Access AT&T NTI MCI Sprint DMS Selection 4ESS NETNET IPS DMS Provisioning 4ESS NETVoice Features DMS 4ESS NET AT&T NTI MCI SprintAT&T MCI Sprint Selection DMS 4ESS NET IPS Switched Data Dedicated Access NTIAT&T MCI Sprint Provisioning DMS 4ESS NET IPS Switched Data AT&T MCI Sprint Virtual Private Network DMS 4ESS NETServices and Features LEC Carriers Call by Call Service AT&T NTI Siemens Selection 5ESSDedicated Access AT&T NTI Siemens Virtual Private Network AT&T NTI DMS 4ESS NETVoice Features AT&T NTI Siemens AT&T NTI SiemensFacility Management Network Message WaitingCall By Call Service Selection Ewsd Switched DataAT&T NTI Siemens 5ESS Virtual Private Network AT&T NTI SiemensIsdn Basic Rate Interface BRI ApplicationsSystem Requirements ONE SC03 Supports Four 2ILCAIsdn Equipment List Isdn PRI Required EquipmentIsdn BRI Required Equipment Isdn Terminal Required EquipmentDocumentation Capacity for ISDN-PRISystem Capacity for ISDN-BRI 24DTI 24PRTPage Wireless System Univerge Neax 2000 IPS Wireless Communication System WCSWired for Wireless Analog PBX InterfaceCcis Interface Wireless Roaming Multi-Site Roaming 931a Roaming over IP Trunk Wireless Definitions HLRWireless Short Text Message Notification OAI Configuration Application Integrated TypeFeatures Feature Matrix by Configuration Type2000 IPS Interface1 Interface2 Wired for Wireless Adjunct Type Integrated TypeFeature Descriptions Wired for WirelessWay Calling HandoverAuthorization Preset DialingOut of Zone IndicationSystem Description Dterm PSDterm PS III Accessories Lithium-Ion BatteryBattery Charger HeadsetsZone Transceiver II ZT Wireless Specifications Zone Transceiver II SpecificationsIntegrated Adjunct Analog Adjunct Ccis WCS Required Equipment Equipment Description QTY RemarksPN-IPTB IPT PN-4VCTI 4VCTWireless LAN Wireless LAN HandsetWireless LAN Documentation Hotel Feature List Hotel/Motel SystemPMS Terminal ConsoleApplication Processor Hotel ConsoleHotel/Motel Front Desk Terminal Station Message Detail Recording SmdrHotel Printer Executed Task Print OutAutomatic Wake-up Check In / Check Out Direct Data EntryDo Not Disturb Console CheckDo Not Disturb-Hotel/Motel Do Not Disturb-SystemHotel/Motel Attendant Console Hotel/Motel Front Desk Instrument House Phone Maid StatusMessage Registration Message WaitingVoice Message Waiting System Voice Message Waiting IndividualProperty Management System PMS Room Cutoff Room Cutoff ConsoleRoom Status Single Digit DialingItems indicated are as follows Specifications PMS/SMDR Interface Hotel Printer Interface Hotel System CapacityDescription Capacity Station Equipment SN716 DeskconCall Accounting AIMWorXMulti-Site Centralized Operations AIMWorX databasesSelect Database Licensing Option Description Information you need before installing AIMWorX SQL Server licensingOracle database LicensingConfigurations StandaloneCall Record and User Capacity AIMWorX Manager Integrating AIMWorX modulesCorporate tier Enterprise tierAlarm Manager 1 SPEAsset Manager Auth Code ManagerBill Reconciler Cable ManagerCustom SPE Writer Hospitality LinksAdditional Reference Material Trouble TicketVoice Mail SPE Work OrderVoice Messaging Systems Voice Mail IntegrationVoice Messaging Systems Description MCI Service Conditions NEAXMail AD-120 System ArchitectureVoice Cards Level II Server Software License with ExchangeClient Access Licenses CAL Third Party SoftwarePlatform Components Optional Software Feature Packages Mail Reader Text-to-SpeechThird Party Fax Server Integration PBX Integration SoftwarePlatform Specifications 2GBNEAXMail AD-64 Level I/Level II Platform Specifications Level I/Level II Specifications Platform LevelLevel I Dell GX280 Level II Dell PE2800 40GB Sata 36GB ScsiUPS Uninterruptible Power Supply Additional Hardware ComponentsOptional Software Optional ActiveFax SoftwareUnified Messaging Hacker Prevention Features are as follows Voice Messaging Systems Voice Messaging Systems Automated Attendant Available LanguagesAudiotext Mailbox ManagerVoice Messaging Systems Maintenance Voice Messaging Systems Visual Messaging ViewMailViewCall Plus NEAXMail IM-16 LX Unified Messaging and Call ManagementFull Digital Integration Hospitality Feature Package Basic FeaturesEnjoy the Benefits of Integrated Messaging Additional Features Niverge Neax 2000 IPS Features and Specification System DocumentationUniverge Neax 2000 IPS Documentation List Univerge Neax 2000 IPS Technical Manuals
Related manuals
Manual 59 pages 49.46 Kb