Kodak 5.1 manual Scanning to network folder

Scanning

Scanning to network folder

You can scan your original and immediately send the scanned file to a network folder directly from the printer.

NOTE: You must first use the Online Printer Management Tool to set up scanning to network folder options (see Setting up Scan To Network Folder, page 26).

1.Lift the scanner lid, and place the original face down in the right-front corner of the scanner glass, then close the lid.

2.Press to select Scan, then press OK.

3.Press to select Scan to Network Folder, then press OK.

4.Select Sharing folder, then press OK.

5.If necessary, enter the 4-digit PIN number (see page 28), select Done, then press OK.

6.Press Start.

79 www.kodak.com/go/aiosupport