Kodak G610 manual Reducing red eye in your prints, Canceling printing

Printing without a computer

Reducing red eye in your prints

Your printer dock automatically detects and corrects red eye in your subjects before you print your pictures.

■Red-eye reduction is applied to images that were captured using the flash on your digital camera.

■You can set red-eye reduction default to always being on or off.

■Printing time may slightly increase when using red-eye reduction.

■Your printer dock may apply red-eye reduction to an area such as red-painted fingernails, which darkens the area in your print. In this case, turn off red-eye reduction.

To set/change the red-eye reduction default:

1Connect the printer dock power (see page 3), then dock your camera (see page 7).

2On the printer dock, press and hold (Down button) and (Transfer button) at the same time for 5 seconds. (The Red Eye screen appears.)

3Follow instructions on the camera or computer screen.

4Press (OK/Print button) to accept the red-eye default setting.

Canceling printing

To cancel printing, do one of the following:

■Press Cancel.

A confirmation screen appears. Printing is cancelled when you select that you are sure you want to cancel printing.

■Press and hold Cancel for 2 seconds.

Printing is cancelled automatically.

NOTE: When printing is cancelled, the paper is ejected from the printer dock. If you cancel a print during the fourth pass (clear coat), the print is ejected upon completion.

16 www.kodak.com/go/support