Kodak G610 manual Or inside the printer dock, Printing stops

Troubleshooting

If... Try the following

Printing stops	IMPORTANT: Use only Kodak color cartridge & paper kits (with
during mid-print		symbol) for your printer dock. Do not use inkjet paper.
(paper stops	■ Check the power connection.
feeding)	■ Check the paper:
	1	Remove the paper tray (page 6).
	2	Check the paper slot on the back of the printer dock.
	3	Remove loose paper from the printer dock. If paper is jammed, see
		page 31.

4Carefully "fan" the paper to keep the sheets from sticking together (see page 29).

5Reload the tray. Do not load more than 30 sheets of paper (see upper limit line, , inside tray).

6 Re-install the tray, then press to resume printing.

■Clean the paper-feed rollers (page 26).

Print is smudged	■ Fingerprints may be on glossy side of paper. Handle paper by the edges
	(page 2).
Print is spotted	■ Check for dirty paper; wipe paper gently with a dry, lint-free cloth to
	remove dirt. For excessive dirt or debris, thoroughly clean the paper tray,
	and load new paper (page 4). Check and clean the paper-feed rollers
	(page 26).
	NOTE: Keep paper in the original protective wrap, and remove and close the paper
	tray and paper tray door to keep dust and debris from collecting on the paper
	or inside the printer dock (page 6).

32 www.kodak.com/go/support