Kodak G610 manual Getting started, Finding a location for your printer dock, Cartridge

1

Getting started

Finding a location for your printer dock

■Place the printer dock on a flat, clean, dust-free surface, in a dry location, and out of direct sunlight.

■Allow at least 5 in. (12.7 cm) clearance from the

5 in.		back of the printer dock for paper travel.
(12.7 cm)	■	For proper ventilation, make sure the top and back
		of the printer dock are not blocked.

■When connecting power or USB cables, keep the

cables clear of the paper path to the front and rear of the printer dock.

■Avoid areas where ventilation ducts, open doors, or frequent passersby might expose the printer dock and paper to high levels of dust and debris. Airborne dirt particles can affect picture quality.

■Allow enough space on all sides of the printer dock to let you connect and disconnect cables, change the cartridge, and add paper.

Handling and storing the cartridge and paper

Cartridge

■Keep cartridges out of the reach of children.

■For best quality prints, store the cartridge in a location where the temperature does not exceed 85°F (30°C).

■To avoid getting fingerprints on the ribbon, handle the cartridge by the spool ends.

■Keep the cartridge away from direct sunlight and out of high-temperature environments (such as a vehicle parked in the sun).

www.kodak.com/go/support 1