Kodak G610 manual Still having problems?

Page 45

Troubleshooting

Transfer light

Light status

Cause

 

Action/solution

 

 

 

 

Light glows green

Printer dock ready for

 

None required.

 

transferring pictures.

 

 

 

 

 

 

 

Light blinks green

Pictures transferred to the

 

None required.

 

computer.

 

After transferring pictures, the transfer

 

 

 

light continues to blink green until

 

 

 

either the camera is removed, the

 

 

 

Transfer button is pressed again, or the

 

 

 

connection is no longer available.

 

 

 

 

Light is off

No pictures in camera or on

 

None required.

 

memory card.

 

 

 

 

 

 

 

 

Camera not docked.

 

To enable Transfer:

 

 

 

1 Connect printer dock to computer

 

Printer dock not connected to

 

 

computer.

 

 

(page 19).

 

 

2

Take pictures.

 

 

3

Dock the camera.

 

 

 

 

 

Camera not properly seated on

 

Reseat the camera on the printer dock

 

connector.

 

(page 7).

 

 

 

 

 

Computer off.

 

Turn on the computer.

 

 

 

 

 

Still having problems?

Visit www.kodak.com/go/support, or see Chapter 8, Getting help, or contact your camera manufacturer.

www.kodak.com/go/support

39

Image 45
Contents User’s guide Kodak EasyShare G610 printer dockEastman Kodak Company Rochester, New York 111 Front/top/side viewBack/top/side view Table of contents Table of contents Finding a location for your printer dock Getting startedHandling and storing the cartridge and paper CartridgeAttaching the custom camera insert PaperPlace the insert tabs into the back slots of the dock Connecting the power Purchase an AC power adapter and other accessories atDock See Handling and storing the cartridge on Loading the cartridge and paperClose the paper-tray cover Inserting the paper tray Inserting and removing the paper trayRemoving the paper tray Pull the paper tray out to remove itDocking and charging the camera Docking the cameraAttach a custom camera insert see Charging the camera Refreshing the Kodak Ni-MH rechargeable camera battery Best camera setting for 4 x 6 inch 10 x 15 cm prints Printing from your digital camera Printing without a computerPrinting without a computer Selecting pictures on your camera for printingSelect Review All Pictures, then press OK/Print button Printing tagged picturesChanging the printed picture layout Effect of picture layout on number of copies To change the default picture layoutTo cancel printing, do one of the following Press Cancel Canceling printingPress and hold Cancel for 2 seconds Reducing red eye in your printsInstalling software Installing the softwareFollow the on-screen instructions to install the software If prompted, restart the computer Using the printer dock with a computer Connecting to a computerUSB connector Transferring pictures from your digital camera Canceling transferringPrinting from a computer Printing with Kodak EasyShare softwareSee the EasyShare software Help for details Printing with other applications To change the color mode Choosing a color modeCanceling printing Maintaining your printer dock Maintenance and firmware upgradeCleaning the paper-feed rollers Transporting your printer dock Upgrading your printer dock firmwareRemove the camera, paper tray, and cables Printing problems TroubleshootingTroubleshooting Troubleshooting Printer dock for jammed paper Printing stops Or inside the printer dockExposed Pictures are Print head from overheating Before attempting to remove the cartridge Try one or more of the following Transfer/communication problemsPrinter-dock-status lights Camera battery light Light status Cause Action/solutionStill having problems? Helpful links Getting helpGetting help Appendix Printer dock specificationsAppendix Important safety instructionsDo not charge non-rechargeable batteries Extending battery lifeAppendix Limited Warranty Limited warranty coverageLimitations Outside the United States and Canada Your rightsFCC compliance and advisory Regulatory informationAustralian C-Tick Canadian DOC statementDC-in, power connector, ii, 3 door AC power adapter & cord, 3 USBPreparing for use with printer dock Printing from GeneralPower Software Japanese compliance Kodak EasyShare software helpMacintosh OS Turning printer dock on/off Supplies & accessories, orderingInstalling software on CableVcci compliance