Kodak 7 manual Error Codes Explanation

Page 25

Error Codes (continued)

Code

Explanation

Action Needed

21The drum-charge corona has malfunctioned. Turn the printer off and then on again. If the problem persists, call for service.

22

The thermistor has malfunctioned.

Turn the printer off and then on again. If the

 

 

problem persists, call for service.

23

An excessively high temperature has been

Turn the printer off and then on again. If the

 

detected.

problem persists, call for service.

24

A heater lamp has malfunctioned.

Turn the printer off and then on again. If the

 

 

problem persists, call for service.

25

The main drive motor has malfunctioned.

Turn the printer off and then on again. If the

 

 

problem persists, call for service.

26

The transfer corona or separator has

Turn the printer off and then on again. If the

 

malfunctioned.

problem persists, call for service.

27The polygon drive motor has malfunctioned. Turn the printer off and then on again. If the problem persists, call for service.

28

The S-SCAN-out has malfunctioned.

Turn the printer off and then on again. If the

 

 

problem persists, call for service.

38

Command overflow.

Call for service.

44

There is an error in the external

Turn the printer off and then on again. If the

 

communications system.

problem persists, call for service.

46

The TSCR communications malfunctioned.

Turn the printer off and then on again. If the

 

 

problem persists, call for service.

47

The sorter communications malfunctioned.

Turn the printer off and then on again. If the

 

 

problem persists, call for service.

48

The sorter interface unit communications

Turn the printer off and then on again. If the

 

malfunctioned.

problem persists, call for service.

49

Developing bias error.

Turn the printer off and then on again. If the

 

 

problem persists, call for service.

50

PC drum drive malfunctioned

Turn the printer off and then on again. If the

 

 

problem persists, call for service.

51

The develop roller drive malfunctioned.

Turn the printer off and then on again. If the

 

 

problem persists, call for service.

52

The develop sleeve malfunctioned.

Turn the printer off and then on again. If the

 

 

problem persists, call for service.

53

The toner supply motor malfunctioned.

Turn the printer off and then on again. If the

 

 

problem persists, call for service.

54

Elevator tray 1 malfunctioned.

Open paper cassette #1. Check paper position,

 

 

and close paper cassette. If the problem persists,

 

 

call for service.

C-2

November 1996 A-62032

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Kodak Imagelinktm Canada only Canadian Department of CommunicationsLocate the printer in a well-ventilated room Introduction OverviewLocation/Description of parts-Back Location/Description of parts-Inside Turning the printer on and off Operation panel OperationUniversal cassette Loading paperUSA only Page Installing the paper exit tray Clearing paper jams Inside the paper supply cabinet J1 errorM4 M3 Inside the printer J2 or J3 errorLock Release Lever Page Toner Bottle Holder Lever Changing a toner bottlePage Changing the toner collection bottle General specifications Appendix a SpecificationsSize Paper CassetteInstalled without sorter option Appendix B Installation considerationsSpace requirements Installed with sorter option Installation environment Power source Ordering information for consumables for the Printer Ordering information for the Printer 7 and accessoriesFor paper and toner Error Codes Appendix C Printer 7 error, maintenance, and caution codesCode Explanation Action Needed Error Codes Explanation Preventive Maintenance Codes Explanation Action Needed Every 75,000 prints Appendix D MaintenanceNovember 1996 A-62032 External cleaning Cleaning the printerInternal cleaning New equipment warranty- Kodak Imagelink Printer Page Index Index-2 November 1996 A-62032 Eastman Kodak Company
Top Page Image Contents