Clearing paper jams
Inside the paper supply cabinet (J1 error)
M5
When a paper jam occurs, remove the paper jammed in each section according to the following procedures.
1.Pull the paper cassettes out from the printer and check if the paper in each cassette is stored correctly. If the paper is not stored correctly, remove the jammed piece of paper. Push the paper cassettes back into position.
2.Open the paper supply cabinet door (C2) and remove any paper. Close the paper supply cabinet door.
3.If the leading edge of jammed paper has been fed into the printer, open the front cover, send the paper into the printer by rotating the transport roller knob (M5), and remove the paper. (Refer to the “Jam Removal Diagram” label inside the printer front cover.) Close the front cover.