33
EN
PIN code setting
A PIN (personal identification number) code is required to access the registration, delete handset, and reset
mode.
The factory-preset code is "0000". You can change it to a unique code of your own. A PIN code can be up to
8 digits long.
1. In idle mode, press MENU.
2. Press UP / DOWN to select SYSTEM, and then press OK.
3. Press UP / DOWN to select CHANGE PIN. Press OK.
4. Enter the current PIN and press OK.
5. Enter the new PIN and press OK.
6. Repeat the new PIN and press OK to confirm.
7. Press OK to save settings.
Restore handset default settings
You can reset the display, sounds, and other settings of your phone. Refer to the chapter “Default settings”,
page38.
1. In idle mode, press MENU.
2. Press UP / DOWN to select SYSTEM, and then press OK.
3. Press UP / DOWN to select RESET. Press OK.
4. Enter the PIN code (by default PIN is "0000") and press OK to confirm.
5. Press OK to confirm.
Note : You will hear a reject tone and wrong PIN is displayed if the current PIN is incorrect or the new
PIN is not repeated correctly. Follow steps 3 to 7 and try again.
Other features