ENConnect
1.Insert the plug of the power cord into the socket on the bottom of the base unit then plug the power supply unit into your power outlet.
Note : *You may find in the box the line adaptor delivered separately from the line cord. In this case, please, first plug this line adaptor onto the line cord before connecting it to the line socket.
2.Connect the telephone line cord to the phone socket on the bottom of the base unit and to the wall phone socket.
3.Each handset comes with a charger and adapter. Insert the plug of the power cord into the socket on the bottom of the charger. Plug the power supply unit into your power outlet.
4.To remove the battery compartment, unlock the battery door lock at the bottom of the handset.
5.Place the 2 rechargeable NiMH AAA batteries (included), observing their polarities, into the battery compartment on the handset.
6.Slide the battery door firmly into place until the battery door locks.
Note : The base station or charger must always be plugged into the mains when charging or when in use. Always use rechargeable batteries.
The warranty does not apply to the batteries and any other components which have a limited lifetime or are exposed to wear.
7.Please note that handset may not turn ON for up to 15 minutes if the batteries are too low. Before first use, put the product on the charger and charge batteries for 24 hours minimum. The handset may get warm during the initial charge. This is normal.
Note : Always use the line cable and the adapters provided with the product.
10
