34
EN
Set Baby call on/off
Baby call allows you to dial out a programmed number via the telephone line by pressing any key on the handset
(except the OFF key ).
1. In idle mode, press MENU.
2. Press UP / DOWN to select SETTINGS, and then press OK.
3. Press UP / DOWN to select BABY CALL. Press OK.
4. Press LEFT / RIGHT to select ON.
5. Press DOWN, enter or edit the number and press OK to confirm.
BABY CALL is displayed when you return to standby mode.
To turn off baby call,
1. Press the CANCEL soft key.
2. Press OK to confirm.
Registering

Register a new handset to base station

Each base can register up to 4 handsets.
1. In idle mode, press MENU.
2. Press UP / DOWN to select SYSTEM, and then press OK.
3. Press UP / DOWN to select REGISTER. Press OK.
4. Before you enter the PIN (by default PIN is "0000"), long press on the base for 4 seconds.
5. Enter the PIN code and press OK.
Note : If the base is full, the base would not go into registration mode. See the section “Unregister a
handset”, page35 to unregister a currently registered handset.
Other features